1) tin-lead alloy
锡铅合金
1.
Studies on the effect of plating parameters on tin-lead alloy electroplating in alkylsulfonate baths;
烷基磺酸盐电镀锡铅合金工艺影响因素的研究
2.
Determination of tin and lead content in fluoborate tin-lead alloy plating baths;
氟硼酸盐锡铅合金镀液中锡、铅含量的测定
3.
Effects of technological parameters on methane-sulfonate tin-lead alloy electroplating;
工艺参数对甲基磺酸盐镀锡铅合金的影响
3) Sn Pb alloy
锡铅合金
1.
The wastewater treatment of Sn Pb alloy electroplating and polishing passivation of brass were harsh, owing to the complex composition, diversity of harmful substances, and fluctuant concentrations of the ingredients to be removed.
黄铜带电镀锡铅合金及黄铜抛光钝化的废水成分复杂、有害物质浓度高且波动性强,分流调匀后采用物化和生化相结合的工艺处理,同时应用了pH/ORP控制与计算机控制相结合的自动化控制系统,实际运行效果良好,出水能达标排放。
2.
The electroless Sn Pb alloy plating process in methylsulfonic acid system was studied.
研究了甲基磺酸体系化学镀锡铅合金。
4) Pb-Sn alloy
铅-锡合金
1.
The aluminum for light-grid material in lead-acid batteries was electroplated with Pb-Sn alloy from sulphamate bath,and the opitimum technology condition and electrolyte composition were determined.
利用氨基磺酸盐镀液在铝合金基体上电镀铅-锡合金作为铅酸蓄电池的轻型板栅材料,确定了最佳电镀工艺条件和镀液配方。
5) Pb-Sn alloy
铅锡合金
1.
Effects of tin content on the oxygen evolution behavior of Pb-Sn alloys;
锡含量对铅锡合金析氧行为的影响
2.
A two-layered structure of eutectic-solid sulotion is formed in the microstructure of Pb-Sn alloy obtained from quasi-two-dimensional electrodeposition.
铅锡合金的准二维电沉积物具有伪共晶-固溶体双层结构。
3.
This article,using the diffusion theory in solid metals,discusses in detail the mechanism of hot-dip Pb-Sn alloy coating of the double-wall brazed tube,and analyzes the existing defects in the production of pb-Sn hot-dip coated double-wall brazed tube in line with the theory on Pb-Sn alloy corrosion resistance.
应用固态金属中的扩散理论详细论述了在双层卷焊钢管上热镀铅锡的机理;应用铅锡合金耐蚀性理论对热镀铅锡双层卷焊钢管生产中所存在的缺陷进行了分析。
6) lead-tin alloy
铅锡合金
1.
The paper reports a iiew method inwhich ammonium modybdate iS released totitrate the lead content in lead-tin alloy as these is appearomee of an acute notch on thedE/dt-E curve ofZn ̄(2+) at the titration endpoint.
本文利用Zn ̄(2+)在示波图上有敏锐的切口变化并可指示示波滴定终点的性质,报告了用钼酸铵释放法示波滴定铅锡合金中铅含量的新方法。
2.
The reason lies in unable butt fusion between terne plating of the copper-insert surface and lead-tin alloy used for terminal post.
本文针对阀控式铅酸蓄电池极柱铜芯的松动问题进行了分析讨论,通过试验发现铜芯松动的原因在于铜芯表面的电镀铅锡合金层与柱体浇铸用的铅锡合金不能熔合在一起。
补充资料:电镀锡铅合金
分子式:
分子量:
CAS号:
性质:借电化学作用,在钢铁或其他金属制件的表面上沉积一层锡铅合金的方法。用于提高化学稳定性和抗蚀性,防止海水或盐雾的腐蚀,并增加紧配性和抗磨性。一般将金属制件作阴极,锡铅合金板作阳极,挂入以苯酚磺酸锡、苯酚磺酸铅、苯酚磺酸和明胶(或以氟硼酸锡和氟硼酸铅)所配成的电镀液中,进行电镀。
分子量:
CAS号:
性质:借电化学作用,在钢铁或其他金属制件的表面上沉积一层锡铅合金的方法。用于提高化学稳定性和抗蚀性,防止海水或盐雾的腐蚀,并增加紧配性和抗磨性。一般将金属制件作阴极,锡铅合金板作阳极,挂入以苯酚磺酸锡、苯酚磺酸铅、苯酚磺酸和明胶(或以氟硼酸锡和氟硼酸铅)所配成的电镀液中,进行电镀。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条