说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 主采场
1)  main stope
主采场
1.
This paper analyzes the cause of the high rate of big rock in the main stope.
文章分析了主采场大块率高的原因,根据主采场地质构造特点,综合应用逐孔爆破和挤压爆破的技术优点进行爆破攻关,在难爆区域取得了突破性进展,并取得了较好的经济效益和社会效益。
2)  stope [英][stəup]  [美][stop]
采场
1.
Reliability fuzzy comprehensive evaluation of man-machine-environment system in stope;
采场人-机-环境系统可靠性模糊综合评价
2.
Fuzzy comprehensive evaluation of working environment in stope;
采场作业环境可靠性模糊综合评判
3.
Fuzzy synthesis analysis on human reliability of stope;
采场人员可靠性模糊综合分析
3)  workings ['wə:kiŋz]
采场
1.
Ventilation resistance and ventilation isobar in the workings were measured with barometer.
采用气压计混合读数法测定了综放采场区域的通风阻力及通风等势图。
2.
Based on theory of porous medium seepage, the airflow in mine workings is regarded as a problem of unsteady flow.
以多孔介质渗流理论为基础,视采场气体流动为非稳定流问题,将应用数学中的奇异摄动理论应用于采矿问题中,为采矿工程问题的研究提供了新的手段;为矿井安全工程、特别是实现自动监控提供了理论依据和计算方法,丰富了采场通风理论。
3.
The impact load on the support induced in the hard roof, whenweighting, always brings about catastrophe in the workings.
本文的研究结果也可用于支架选型、大流量卸载阀选型和坚硬顶板采场来压强度的预计。
4)  mining field
采场
1.
Analysis on the factors influencing stress-strain of mining field and mine roadway;
影响采场和巷道应力应变因素分析
2.
Study on energy store and release of mining field large area hanging arch system;
采场大面积悬顶系统贮能及释放研究
3.
The first weighting of mining field will result in serious underground pressure behavior which poses a serious threat to safety of staff and equipments.
采场基本顶初次来压对工作面带来严重的矿山压力显现,对生产和人身安全造成严重威胁。
5)  flow field in the workings
采场流场
6)  large mining height workface
大采高采场
1.
The distribution laws of stress fields and plastic failure with the distance of coalface advance in the large mining height workface are simulated by means of FLAC3D software,and the stress value in each unit is obtained.
通过FLAC3D软件对大采高采场工作面推进过程中煤岩内部应力场分布规律及其塑性破坏进行了模拟,并提取了各个单元的应力值,以此分析了大采高采场支承压力的分布特征,得出大采高采场支承压力分布规律。
补充资料:采场测量


采场测量
surveying in stope

  ea一ehang eellang采场测且(surveying in stope)采场回采矿石阶段的测量工作。采场测量的目的是绘制采场的平面图、纵投影图和断面图,以统计矿石产量和计算矿石损失率和矿石贫化率。采场测量包括:(l)根据采准巷道和采场内的控制点标定采场位置、炮孔位置、验收和填图。(2)测量采场的轮廓并填图。 随着.矿体赋存条件和采矿方法的不同,采场测绘方法也异,分为人员能进人的采场测量、深孔刚量和采场空周测量。人员能进人的采场测量分为两种情况:(l)矿床较窄,用浅孔留矿法开采时,形成狭长采空区,在两天井间敷设经纬仪或罗盘仪导线,用支距法测量采场轮廓。并绘制采场平面图、断面图和纵投影图等(图1)。(2)采场较宽大时,采用极坐标法,用经纬仪、平板仪或罗盘仪进行测绘,通过天井把导线点引入采场,建立控制点I、I、兀、份(图2)。在l点安置经纬 纵投影图A一A断面图经 图1留矿法采场图姐分 图2宽大采场测t仪,后视l点,依次测量采场各轮廓或顶底板各特征点的坐标和高程,最后绘制采场图。
  
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条