说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 螺杆压缩机
1)  screw compressor
螺杆压缩机
1.
Common troubles and maintenance of screw compressor;
浅析螺杆压缩机日常故障
2.
Application of RWⅡ-496H screw compressor;
RWⅡ-496H型螺杆压缩机的应用
3.
Technical analysis and countermeasures of LGW 25/16-38/8 screw compressor smooth operation;
LGW25/16-38/8螺杆压缩机平稳运行的技术分析和对策
2)  helical-lobe compressor
螺杆压缩机
1.
Property,maintenance and innovation of new type helical-lobe compressor
新型螺杆压缩机的性能、维护及改进
2.
A new type of helical-lobe compressor LG-148/6.
介绍了一种适用于大型PVC生产企业的新型螺杆压缩机LG-148/6。
3.
Mineral oil for helical-lobe compressor is diluted and this increases the fault of compressor.
瓦斯回收系统是现代炼油厂一个重要的系统,螺杆压缩机因其工作的稳定性和高效性在瓦斯回收系统中得到了充分应用。
3)  housing of screw rod compressors
螺杆压缩机机体
4)  single screw compressor
单螺杆压缩机
1.
Simulation of high speed single screw compressor in fuel cell;
燃料电池用高速单螺杆压缩机的仿真研究
2.
Development on large capacity single screw compressor;
大容量单螺杆压缩机的发展
3.
Computer aided design system for CP single screw compressor;
CP型单螺杆压缩机的计算机辅助设计
5)  screw refrigeration compressor
螺杆制冷压缩机
1.
State art of vibration and noise research of screw refrigeration compressor is summarized and the whole test system of vibration and noise is introduced.
概述了国内螺杆制冷压缩机振动与噪声研究现状 ,介绍了完整的噪声与振动测试系统 ,分析了螺杆制冷压缩机振动、噪声特性 ,提出了减振降噪措施。
2.
It is very common for screw refrigeration compressors to increase the load automatically.
针对螺杆制冷压缩机普遍存在的负荷自动加载的技术难题,通过采集蒸发压力信号作为控制基准,应用PLC控制器控制负荷加/减载,解决了负荷自动加载问题,改善了安全生产状况,减轻了操作人员劳动强度。
3.
The concept of interior volume specific ratio, regulative purpose and execution methods are explained, cases concerned with interior volume specific ratio are analyzed, the importance of interior volume specific ratio in the operation of screw refrigeration compressor are emphasized.
阐述了内容积比的概念、调节的目的和实现方式、分析了与内容积比调节相关的案例,明确了内容积比在螺杆制冷压缩机运行中的重要性。
6)  oil-free screw compressor
无油螺杆压缩机
补充资料:螺杆压缩机
      利用螺杆形转子在气缸内作回转运动来压缩和输送气体的回转压缩机。螺杆压缩机广泛应用于矿山、化工、动力、冶金、建筑、机械和制冷等部门。排气量为25~38000米3 /时。在大气压力下吸气时,单级的排气压力可达0.5兆帕;两级和三级的排气压力分别达1.2兆帕和3兆帕以上。单螺杆压缩机都是注液冷却的。工业生产中以双轴(双螺杆)的压缩机最多,但单轴(单螺杆)的压缩机也逐渐获得应用。
  
  图为双螺杆压缩机的结构和工作过程。两个相互啮合的螺杆(转子)螺旋面与气缸内壁构成工作容积。工作容积的大小随着转子的转动而变化,位置也不断向前移动,从而完成吸气、压缩和排气过程。主动阳螺杆和从动阴螺杆的齿数可以有不同的配合,如3对5、5对7,但最常用的是4对6的配合。转子端面型线对螺杆压缩机效率有很大影响。20世纪70年代初期,非对称型线取代对称圆弧型线后,压缩机效率提高10%。新出现的X型线等又使绝热效率提高5%左右。
  
  双螺杆压缩机分为干式和注油式两种。①干式:螺杆轴端装有同步齿轮,可保证转子间高精度啮合,同时使相对运动的螺杆间不接触,不须注油润滑,因而排出的气体不含润滑油。为了改善密封性,压缩机采用较高转速(3000~20000转/分),它除用电机增速驱动外,还可用高速汽轮机直接驱动。②注油式:螺杆轴端不装同步齿轮,靠两螺杆直接接触传动,须注油润滑冷却。注油还能改善密封性,转速可降低到1000~3000转/分。螺杆压缩机工作噪声很大,中小型螺杆压缩机均采用隔声罩。
  

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条