1) rigid particle
刚性粒子
1.
Due to its proper properties of insulation and aging resistance,or acting as a kind of organic rigid particles,the prospect of hard pitch in polymer additive is given.
由于硬沥青产量大、价廉易得,以及具有有机刚性粒子的特征,对材料的亲和性好、有易于加工成型的热塑性能、绝缘性佳、优良的抗老化性能等特殊的物理化学性能,硬沥青在高分子材料加工过程中能作为一种新型添加改性材料。
2.
The recent developing situation of HDPE toughened with rigid particles in China was introduced in detail.
详细论述了近年来国内无机和有机刚性粒子增韧HDPE的研究发展状况,包括增韧的材料体系、不同刚性粒子增韧实例和刚性粒子在基体中的分散与形态,并探讨了刚性粒子的增韧机理。
3.
This paper reviews the reason and mechanism of polymer toughened by rigid particle and stresses on the mechanism of plastic deformation and crystalline shape change.
综述了刚性粒子增韧聚合物的由来及增韧机理。
2) rigid particles
刚性粒子
1.
The different mechanisms and methods of plasticizers for toughening the rigid polyvinyl chloride (PVC) were introduced and the studies on toughening of modified PVC with different elastomers and rigid particles compound were reviewed.
介绍了硬质聚氯乙烯(PVC)增韧改性剂的种类、机理和方法,综述了采用不同的弹性体、刚性粒子与硬质PVC增韧改性的研究现状。
2.
Toughening modification of PP with rubber, elastomer, rigid particles and corresponding toughening mechanism was reviewed.
综述了橡胶或弹性体增韧PP及其机理、刚性粒子增韧及其机理和橡胶 /刚性粒子 /PP三元复合增韧体系 ,简要介绍了PP改性技术的最新进展以及PP综合改性的新思
3) rigid filler
刚性粒子
1.
The new method and mechanism is introduced that polymer/polystyrene are toughened and reinforced with rigid filler.
综述了近几年来增韧增强苯乙烯类聚合物的研究进展,着重介绍了刚性粒子增韧增强苯乙烯类聚合物的新方法及其机理。
2.
As a new toughening way, it attracts more and more attention that rigid fillertoughen plastic.
刚性粒子增韧作为一种新的增韧方法，已越来越受到人们的关注。
4) inorganic rigid particle
无机刚性粒子
1.
The research progress of UPVC toughened by inorganic rigid particles;
无机刚性粒子增韧UPVC研究进展
2.
The newest study situation of toughening PP by using rubber or elastomer blend,thermoplastic plastics,inorganic rigid particle,nanoparticle and crystal whisker is introduced.
综述近2年增韧PP的最新研究进展,介绍橡胶或弹性体共混增韧、热塑性塑料增韧、无机刚性粒子增韧、纳米粒子增韧及晶须增韧PP的最新研究情况。
3.
The newly research achievement of the author in the field of inorganic rigid particles strengthened and toughened polymer(Nylon, PP, PE) was introduced in this paper.
介绍了作者近年来在无机刚性粒子增强增韧聚合物（尼龙、聚丙烯、聚乙烯）方面的最新研究结果。
5) Rigid inorganic filler
刚性无机粒子
1.
Meanwhile the toughening mechanism of rigid organic filler (ROF) and of the rigid inorganic filler (RIF) were discussed.
本文介绍了橡胶增韧机理的发展以及研究进展 ,同时讨论了刚性有机粒子 (ROF)增韧机理和刚性无机粒子 (RIF)增韧的机
6) organic rigid particle
有机刚性粒子
1.
Study of Toughening of PPS by Organic Rigid Particle;
有机刚性粒子增韧聚苯硫醚的研究
补充资料：初级粒子和原级粒子
分子式：
CAS号：
性质：又称初级粒子和原级粒子。利用各种化学反应方法得到的最初粒子(晶粒)。一次粒子的大小约为0.005～1μm，比筛分的极限小得多，在介质中有相当高的稳定性。
CAS号：
性质：又称初级粒子和原级粒子。利用各种化学反应方法得到的最初粒子(晶粒)。一次粒子的大小约为0.005～1μm，比筛分的极限小得多，在介质中有相当高的稳定性。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条