说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 模具冲压方向
1)  press direction
模具冲压方向
2)  Stamping die
冲压模具
1.
Application of high quality 65Nb steel for stamping die of steel chains;
优质65Nb模具钢在链条冲压模具中的应用
2.
Topology optimization of high strength steel stamping die in consideration of offset load
考虑模具偏载的高强度钢板冲压模具拓扑优化设计
3.
Rule-based cost estimation system of small-sized stamping dies
基于规则的小型冲压模具报价系统
3)  punching die
冲压模具
1.
Research of the automatic design system for punching dies;
冲压模具自动设计系统的研究
2.
State identification of a punching die based on characteristic analysis of acoustic emission signal
利用声发射信号的特征分析对冲压模具的状态判别
3.
The article focus on the metamorphic layer of punching die,punch matrix and die components in WEDM on the surface,the formation of metamorphic layer,the impact of metamorphic layers,line cutting the microscopic mechanism of the formation of cracks,and many were in-depth study and the corresponding preventive measures.
通过对冲压模具中的关键零件凸凹模线切割加工中表面变质层的研究,对变质层的形成,变质层的影响因素,线切割产生的显微裂纹的形成机理等多方面进行了深入的探讨并提出了相应的预防措施。
4)  die [英][dai]  [美][daɪ]
冲压模具
1.
Research and Development of Expert System for Die Material Selection and Heat Treatment Plan;
冲压模具选材及热处理工艺方案制定专家系统的研究与开发
2.
To design a separate die for each product is time consuming and expensive task.
冲压模具设计是一项十分复杂的工作。
3.
In this paper, the application of CLIPS is studied in developing the expert system used for selecting die-materials, and the approaches of resolving some practical problems are discussed by means of CLIPS, such as knowledge representation, pattern-matching algorithm and reasoning under uncertainty, as well as the structure of die-material database, which sustained the expert system.
研究CLIPS在开发冲压模具选材专家系统中的应用问题 ,论述了借助CLIPS解决知识表示、模式匹配算法和不确定推理等实际问题的途径 ,以及支持专家系统的模具材料数据库结构。
5)  Stamping Mould
冲压模具
1.
Using the developing tool of Pro/E, for example: family table, Pro/Program, Pro/Toolkit and so on, to make parameter design about part in stamping mould ACD.
利用Pro/E提供的开发工具 :族表 ,Pro/Program ,Pro/Toolkit等进行冲压模具CAD系统中零件的参数化设计 ,实现了基于Pro/E平台的计算机辅助冲压模具设计系统的开发及应
2.
This paper presents detailed research of some technologies of CAD/CAE/CAM, aiming at auto panel stamping mould.
本文以汽车覆盖件冲压模具为研究对象,对其CAD/CAE/CAM中的若干技术进行了研究。
6)  Stamping Dies
冲压模具
1.
The design improvement of stamping dies on mining tape conveyer;
矿用胶带式输送机冲压模具的设计改进
2.
The Key Technologies Researching and Application of Simultaneous Engineering in the Development of Automobile Body Stamping Dies;
汽车车身冲压模具开发同步工程的关键技术研究及应用
补充资料:冲压模具-冲压名称类英汉对照
plain die简易模
pierce die冲孔模
forming die成型模
progressive die连续模
gang dies复合模
shearing die剪边模
riveting die铆合模
pierce冲孔
forming成型(抽凸,冲凸)
draw hole抽孔
bending折弯
trim切边
emboss凸点
dome凸圆
semi-shearing半剪
stamp mark冲记号
deburr or coin压毛边
punch riveting冲压铆合
side stretch侧冲压平
reel stretch卷圆压平
groove压线
blanking下料
stamp letter冲字(料号)
shearing剪断
tick-mark nearside正面压印
tick-mark farside反面压印
extension dwg展开图
procedure dwg工程图
die structure dwg模具结构图
material材质
material thickness料片厚度
factor系数
upward向上
downward向下
press specification冲床规格
die height range适用模高
die height闭模高度
burr毛边
gap间隙
weight重量
total wt.总重量
punch wt.上模重量
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条