1) translucent silicon nitride ceramics
透明氮化硅陶瓷
3) translucent aluminum nitride ceramics
半透明氮化铝陶瓷
4) silicon nitride ceramics
氮化硅陶瓷
1.
As a new type tool material, the excellent capabilities of silicon nitride ceramics cutting tools ravel out many cutting problems of super hard materials.
氮化硅陶瓷是一种新型刀具材料,其优良的切削性能解决了超硬材料的加工难题。
2.
The dielectric property of silicon nitride ceramics was measured at 10.
通过添加烧结助剂,采用常压烧结工艺制备出不同气孔率(19%～54%)的氮化硅陶瓷。
3.
Silicon nitride ceramics is a sort of material of high temperature and high intensity structure which have been developed since 1950s.
氮化硅陶瓷是50年代发展起来的一种高温高强结构材料,由于其优异的高温力学性能和化学稳定性,在现代制造业中发挥着越来越重要的作用。
5) silicon nitride ceramic
氮化硅陶瓷
1.
However,it is difficult to make silicon nitride ceramic parts.
氮化硅作为高温功能陶瓷性能优越,但将其制备成陶瓷零件比较困难,目前一般用反应烧结法制备氮化硅陶瓷零件。
2.
In the paper, the dispersion of nano-Si3N4 powder, the influence of different nano-Si3N4 concentration on silicon nitride mechanical properties, the influence of the different nano-Si3N4 concentration on silicon nitride ceramic using properties, th.
本文以亚微米级氮化硅为起始原料,加入纳米氮化硅来增强基体,添加氧化铝和氧化钇为烧结助剂,等静压成型,采用无压烧结的方式来制备具有优良性能的氮化硅陶瓷。
3.
In this paper, the influence of sintering technology on the microstructure and mechanical properties of the silicon nitride ceramic were studied.
研究了烧结技术对氮化硅陶瓷显微结构和力学性能的影响。
6) silicon nitride
氮化硅陶瓷
1.
Hard and wear-resistant titanium nitride coatings were deposited by pulsed high energy density plasma technique on silicon nitride ceramic cutting tools at ambient temperature.
用高能量密度脉冲等离子体于室温下在氮化硅陶瓷刀具上成功沉积了高硬耐磨的氮化钛涂层。
2.
The effect of holding time on intergranular phase and mechanical property of GPS silicon nitride ceramics was studied.
研究了保温时间对气压烧结(GPS)氮化硅陶瓷晶界相及力学性能的影响。
补充资料：透明PBLN陶瓷
分子式：
CAS号：
性质：又称透明PBLN陶瓷。是一种透明铁电陶瓷，主要组分为(Pb1-yBa1-y)1-xLaxnb2-x/5O6。具有高的电光效应，一次电光效应为7.45×10-10M/V，二次电光效应为2.09×10-16M2/V2。以高纯三氧化二镧、五氧化二铌(Nb2O5)、β-氧化铅(β-PbO)、碳酸钡为原料，在1300℃下通氧热压烧结而成。主要用于电光源装置和用作原子能反应堆材料。
CAS号：
性质：又称透明PBLN陶瓷。是一种透明铁电陶瓷，主要组分为(Pb1-yBa1-y)1-xLaxnb2-x/5O6。具有高的电光效应，一次电光效应为7.45×10-10M/V，二次电光效应为2.09×10-16M2/V2。以高纯三氧化二镧、五氧化二铌(Nb2O5)、β-氧化铅(β-PbO)、碳酸钡为原料，在1300℃下通氧热压烧结而成。主要用于电光源装置和用作原子能反应堆材料。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条