说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 脲醛树脂胶
1)  urea-formaldehyde resin adhesive
脲醛树脂胶
1.
Synthesis of environment protection type urea-formaldehyde resin adhesive;
环保型脲醛树脂胶的合成
2.
Development of the low cost urea-formaldehyde resin adhesive;
低成本脲醛树脂胶粘剂的研制
3.
The three main adhesives for artificial plate are urea-formaldehyde resin adhesive, phenolic-formaldehyde resin adhesive and melamine-formaldehyde resin adhensive.
人造板工业使用的三大胶是脲醛树脂胶、酚醛树脂胶和三聚氰胺-甲醛树脂胶。
2)  UF resin
脲醛树脂胶
1.
An account is given of the requirements for equipment,adhesive,particle preparation,hot-pressing technology and testing methods when producing Grade E_1 particleboard with E_1 UF resin.
介绍在采用E_1级脲醛树脂胶的情况下,生产E_1级刨花板对设备、胶粘剂、刨花制备、热压工艺及检测的要求。
2.
This paper states that low quality raw material and improper technique proceeding are main factors of affecting product reserving property in preparing UF resin.
本文阐述了在制备脲醛树脂胶的过程中 ,质量较差的原材料和不当的工艺过程 ,是影响成品贮存性的主要因素 ,指出防止生产中出现凝胶等问题的措施。
3.
lt studies the structure and glue property of Salix mongolia, and low poison UF resin used in particleboard of Solix Mongolia.
通过试验分析了脲醛树脂胶中尿素与甲醛的摩尔比与树脂性能的关系;浓缩处理与树脂中游离甲醛含量的关系。
3)  UF resin adhesive
脲醛树脂胶
1.
The effect of the molar ratio of formaldehyde to urea on the properties of UF resin adhesive and particleboard was investigated.
本文探讨了脲醛树脂胶中甲醛与尿素摩尔比(F/U)对胶粘剂和刨花板性能的影响,从而优选出生产E1级刨花板所用的胶粘剂。
2.
The paste formation of UF resin adhesive with low formaldehyde/urea molar ratio indicates the synthesis failure of the resin.
采用低摩尔比合成工艺的脲醛树脂胶产生糊化现象,原因在于加成反应阶段,因介质pH值低,生成了亚甲基脲不溶物,羟甲基化不能充分,它表明此次树脂胜的合成是失败的。
4)  urea formaldehyde resin adhesive
脲醛树脂胶
1.
The storing stability of urea formaldehyde resin adhesive with the change of PH value is researched in attempt to guide the production and imporove the application for products.
脲醛树脂胶的贮存稳定性随 p H值的变化进行研究 ,以指导生产 ,提高产品的适用
5)  Urea-formaldehyde resin adhesive
脲醛树脂胶黏剂
6)  urea-formaldehyde resin
脲醛树脂胶粘剂
1.
Research prograss of environment-friendly urea-formaldehyde resin adhesive;
环保型脲醛树脂胶粘剂研究进展
2.
Study on properties of modified urea-formaldehyde resin;
脲醛树脂胶粘剂性能改善的研究
3.
By using the method of adding mixed modifiers,improving the manufacting process and putting fillers into the formulation and so on,a modified urea-formaldehyde resin with lower level of free-formaldehyde content,stronger shear.
主要利用混合改性、改进生产工艺以及施胶时加入填料等方式研究降低脲醛树脂胶粘剂的游离甲醛含量、剪切强度、耐水性等问题,得到低毒、综合性良好的胶粘剂。
补充资料:胶醛
分子式:OHC(CH2)3CHO 
CAS号:

性质:又称胶醛。无色透明油状液体。具有刺激性特殊气味。凝固点-14℃。沸点188℃(分解)。折射率1.4338。蒸气相对密度dg(空气=1)3.4。易溶于乙醇、乙醚等有机溶剂。不易溶于冷水。与热水互溶。不易燃。易挥发。易聚合。长久存放溶液含量以25%~50%为宜。也可由甲醛为原料制得。由丙烯醛与乙烯基乙醚经Diels-Alder反应后,再在酸催化剂作用下,水解制得。为最好的蛋白交联剂,主要用作鞣革剂。在卫生部门用作消毒、杀菌剂。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条