1) oil resistance
耐油
1.
The oil resistance of the blend was investigated by cross-blending two kinds of EVM(ethylene-vinyl acetate copolymer with different VA content) and two kinds of thermoplastic PU elastomer(TPU)(polyester and polyether type) in different rates.
将2种乙烯-醋酸乙烯酯共聚物(EVM400,EVM700)和2种热塑性聚氨酯弹性体(聚酯型TPU385E和聚醚型TPU8685)按不同并用比进行交叉共混,考察了共混体系的耐油性能。
2.
By adding various additives, properties of new PU sole such as abrasion resistance, oil resistance, electric insulation, antis.
通过增加各种添加剂,使聚氨酯鞋底在耐磨、耐油性、电绝缘、防静电和耐酸碱性能方面有了很大的提高。
3.
The results showed that comparing to unmodified nanocalcium carbonate,the modified nanocalcium carbonate was improved on the basic mechanical properties,aging properties and oil resistance,as blending with carbon black,the aging characteristics was enhanced with nanocalcium carbonate increasing.
结果表明,改性后纳米碳酸钙比未改性的纳米碳酸钙在胶料基本力学性能、耐老化性能及耐油性上均有提高,并用炭黑时,随着纳米碳酸钙量的增大胶料耐老化性能提高。
2) oil-resistant
耐油
1.
The oil-resistant and electricity-conducting rubber membrane was developed using oil-resistant rubber as substrate,fiber woven fabric as framework,and electricity-conducting particulate as stuffing.
以耐油橡胶为基体、纤维编织布为骨架材料、导电微粒为填料复合而成的耐油导电橡胶薄膜,各项指标均满足航空橡胶薄膜标准规定的要求,分析了橡胶薄膜的耐油和导电原理,讨论和研究了橡胶薄膜的耐油导电配方设计及性能搭配。
2.
In this paper, the development of flame-retardant and oil-resistant cable sheath is reported.
本文论述了阻燃耐油电缆护套料的开发过程，讨论了ＡＣＭ／ＣＰＥ并用比、过氧化物、共硫化剂、阻燃剂、填充补强剂及表面处理剂对胶料性能的影响，给出了一个实用、合理的配方。
3) oil-resistance
耐油
1.
The title oil resistant coatings for fuel tanks has been developed by choosing proper polyester resin,epoxy resin and appropriate polyisocanate hardener,The results indicated that the coatings shows good low temperature drying property and corrosion protection, oil-resistance,particularly hot-oil-resistance.
通过选择适当的聚酯树脂和环氧树脂,配以适当的异氰酸固化剂,研制了一种用于油箱的环氧聚氨酯耐油涂料。
4) heat-resisting oilresisting and flame-retarding
耐热耐油耐火的
5) grease proof printing ink
耐油脂油墨
6) oil resistance
耐油性
1.
Research on the oil resistance of PVC/NBR blends;
PVC/NBR共混物的耐油性研究
2.
Study on Mechanical Properties,Hot-air Aging and Oil Resistance of HNBR/EVA Blend;
HNBR/EVA共混物力学性能、耐热氧老化和耐油性能的研究
3.
Study on the heat resistance and the oil resistance of ACM/FKM alloy;
ACM/FKM并用胶耐热性和耐油性研究
补充资料：环氧沥青耐油涂料
分子式：
CAS号：
性质：一种双组分涂料。由环氧树脂与防锈颜料研磨成的色浆构成组分一,煤焦沥青、聚酰胺固化剂为组分二。使用时两组分按比例配成。漆膜耐原油、耐水性好,能经受海水与原油交替腐蚀作用。适用于船舶油舱部位的防腐蚀涂装,但因含沥青,不宜用于成品油。
CAS号：
性质：一种双组分涂料。由环氧树脂与防锈颜料研磨成的色浆构成组分一,煤焦沥青、聚酰胺固化剂为组分二。使用时两组分按比例配成。漆膜耐原油、耐水性好,能经受海水与原油交替腐蚀作用。适用于船舶油舱部位的防腐蚀涂装,但因含沥青,不宜用于成品油。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条