1) Antirust oil
防锈油
1.
Electrostatic spray antirust oil possesses good antirust property,proper viscosity and high breakdown Voltage,and it is showed which can satisfy the technological requirements of electrostatic spray antirust by practical application.
静电喷涂防锈油具有较好的防锈性能、合适的粘度和高的击穿电压,实际应用表明能完全满足静电喷涂防锈的工艺要求。
2.
In order to select the appropriate inhibitor for solvent antirust oil applicable to amphibian armored equipment,single factor experiments and orthogonal experiments of inhibitor have been made.
为优选出适用于两栖装甲装备溶剂型防锈油的防锈剂,先后进行了防锈剂的单因素试验和正交试验。
3.
It is more than a year that the antirust period of thin-film antirust oil SY-100 developed with resin,rust inhibitor and other additives.
用树脂、缓蚀剂和其它添加剂研制的SY-100薄膜防锈油在室内的防锈期可达1年。
2) rust-proof oil
防锈油
1.
Using cooperating effect of different rust-proof agents,a solvent-diluting soft film rust-proof oil was developed for sea equipments.
利用防锈剂之间的协同增效作用,研制出了海洋设备溶剂稀释型软膜防锈油。
2.
The rust-proof oil for aluminum is developed with refined mineral oil as base oil,adding in a film forming agent,antirust additives and a antioxidant.
铝材防锈油是以精制矿物油为基础油,加入成膜剂、多种防锈剂和抗氧剂研制而成。
3.
The influence of rust-proof oils on bearing vibration value is analysed.
分析了防锈油对轴承振动值影响的因素。
3) rust preventive oil
防锈油
1.
Determination of chloride ion in rust preventive oil by ion chromatography
离子色谱法测定防锈油中氯离子
2.
In the light of requirement for electrostatic-proof and rust preventive oil used in electrostatic spraying technology, a series of tests and evaluation was carried out and the formulations of the oil were screened.
针对静电喷涂工艺对防锈油各种性能的要求,探讨了基础油、成膜剂、防锈剂及其它添加辅剂的各自作用及相互之间的配伍性。
4) Rust preventing oil
防锈油
1.
Potential variation of rust preventing oil film after its degradation was studied by using wire beam electrode.
采用丝束电极研究防锈油膜失效之前的电位变化。
5) rust-preventive oil
防锈油
1.
A review is provided for the research progress in the technical standards about the test methods to evaluate the anti-rust properties of rust-preventive oils and aqueous rust-preventive fluids.
介绍了防锈油、水基防锈液防锈性能试验方法标准现状,根据现行诸方法的标准特点进行分类,分析了单一循环室内模拟加速防锈试验方法、标准的模拟原理和价值以及各自的优势和局限性。
6) preservative oil
防锈油
1.
The paper describes the research process,formula,preparation technology and application of soft film preservative oil which can meet the quality index of MIL-C-16173D.
介绍了软膜薄层防锈油的研制过程、配方、制备工艺、性能和应用情况。
补充资料：防锈油
分子式：
CAS号：
性质：具有防锈功能的油。由油溶性缓蚀剂、基础油和辅助添加剂等组成。根据性能和用途，可分为指纹除去型防锈油、水稀释型防锈油、溶剂稀释型防锈油、防锈润滑两用油、封存防锈油、置换型防锈油、薄层油、防锈脂和气相防锈油等。防锈油中常用的缓蚀剂有脂肪酸或环烷酸的碱土金属盐、环烷酸铅、环烷酸锌、石油磺酸钠、石油磺酸钡、石油磺酸钙、三油酸牛脂二胺、松香胺、失水山梨醇单油酸酯、聚乙二醇二油酸酯、聚乙二醇二硬脂酸酯、油酰基肌氨酸及其胺盐、酰胺咪唑啉、苯并三唑、烷基磷酸酯等。广泛用于机械产品防锈。各种金属制品的封存防锈和工序防锈。
CAS号：
性质：具有防锈功能的油。由油溶性缓蚀剂、基础油和辅助添加剂等组成。根据性能和用途，可分为指纹除去型防锈油、水稀释型防锈油、溶剂稀释型防锈油、防锈润滑两用油、封存防锈油、置换型防锈油、薄层油、防锈脂和气相防锈油等。防锈油中常用的缓蚀剂有脂肪酸或环烷酸的碱土金属盐、环烷酸铅、环烷酸锌、石油磺酸钠、石油磺酸钡、石油磺酸钙、三油酸牛脂二胺、松香胺、失水山梨醇单油酸酯、聚乙二醇二油酸酯、聚乙二醇二硬脂酸酯、油酰基肌氨酸及其胺盐、酰胺咪唑啉、苯并三唑、烷基磷酸酯等。广泛用于机械产品防锈。各种金属制品的封存防锈和工序防锈。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条