1) Zn-Fe alloy
锌铁合金
1.
Cleaner production process of Zn-Fe alloy plating;
清洁生产型锌铁合金电镀工艺
2.
Barrel plating process of Zn-Fe alloy for motor components and parts;
汽车零部件锌铁合金滚镀工艺
3.
Property research of Zn-Fe alloy plating coat in (NH_4)_2Fe(SO_4)_2 system
硫酸亚铁铵体系锌铁合金镀层的性能研究
2) zinc-iron alloy
锌铁合金
1.
Mechanism of anomalous codeposition of zinc-iron alloys based on ligand field theory;
基于配体场理论的锌铁合金异常共沉积机理
2.
The optimal formulation and technological process for chemical black coloring of zinc-iron alloy and tin surfaces present together were investigated.
通过单因素试验,获得了用于锌铁合金和锡表面共同着黑色膜的常温化学钝化方法,优选出的最佳工艺参数为:40。
3) Zn-Fe alloy
锌-铁合金
1.
The effects of cerium additive on the Zn-Fe alloy electrodeposition bath and coating were investigated.
研究了铈对电沉积锌-铁合金镀液及镀层性能的影响,通过分散能力、阴极极化曲线测定,得出在镀液中添加一定量的氯化亚铈能改善镀液性能。
2.
The drawing difficulty is settled by adopting small draught and multi-pass drawing process,reducing the thickness of Zn-Fe alloy and using artificial aging process actively.
分析大直径高强度镀锌钢丝拉拔困难的主要原因在于锌-铁合金层较厚、钢丝中碳含量和锰含量较高。
4) zinc-iron alloy
锌-铁合金
1.
Study of additives for zinc-iron alloy plating in alkaline zincate bath;
碱性锌酸盐体系锌-铁合金电镀添加剂的研究
2.
The zinc-iron alloy electroplating technology in zincate solution by pulse current was investigated.
介绍了在锌酸盐溶液中脉冲电镀锌-铁合金工艺。
3.
A variety of additives for zinc-iron alloy electroplating process in potassium chloride system was introduced,the process range and operating conditions related to the potassium chloride zinc-iron alloy plating were determined.
简述了氯化钾体系中镀锌-铁合金工艺的各种添加剂,确定了氯化钾镀锌-铁合金的电镀工艺范围和操作条件,并进行了分散能力、深镀能力、电流效率、阴极极化曲线、沉积速度、镀层脆性、结合力及耐蚀性等镀液镀层的性能测试。
5) zinc–iron alloy
锌–铁合金
6) Zn-Fe-alloying
锌铁合金化
1.
The microstructure of Zn-Fe-alloying coatings was observed and analyzed by optical microscope,X-ray diffraction and M352 Corrosion Measurement System.
研究了不同锌铁合金化工艺对 ST14钢的镀层及镀层对腐蚀的影响,用光学显微镜观察了合金化层的组织形貌,用 X 射线衍射方法分析了合金化层表面的相组成,用电位差仪测量了电位,并进行了盐雾腐蚀实验。
补充资料：钨铁电炉出铁(吉林铁合金厂)
钨铁电炉出铁(吉林铁合金厂)
吻 他排由帕中桩了士朴屏人乙曰“
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条