1) support frame
支撑架
1.
This paper introduces the method of installing support frames to decrease the span of the bridge and the bending deflection of the mid-span.
本文重点介绍通过设置支撑架的方法,以减小桥梁跨径与跨中挠度,从而达到加固桥梁的目的。
2.
In this paper, the support frame structure of high-rise building transfer floor is discussed and the method of design based on limited state and the method of conveying loading for multi-level are expounded.
针对高层建筑转换层施工的特点,着重论述了高层建筑转换层支撑架的结构构造,讨论了基于承载能力极限状态的支撑架设计方法,论述了转换层支撑架的多层传力方式及力学分析模型,运用了基于极限状态设计理论对重庆时代广场转换层支撑架进行了计算,并结合计算软件SAP,对支撑架受力进行了必要的分析。
3.
In this paper,design technologies of large tower crane by climbing support frame are introduced including the loads of support design,structural arrangement,and partial design as well as construction requirements.
结果表明支撑架操作简单,安拆安全方便。
2) cage
[英][keɪdʒ] [美][kedʒ]
支撑架
1.
Biomechanical study of Femoral Neck on Percutaneous titanium alloy cage implantation in dogs;
钛合金支撑架植入对狗股骨颈力学强度的影响
2.
Titanium alloy cage implantation for the treatment of the ischemic necrosis of femoral head in dogs;
钛合金支撑架植入治疗股骨头缺血性坏死的动物实验研究
3.
Biomechanical study of titanium alloy cage implantation for the large aperture core decompression of femoral head
人股骨头大孔径髓芯减压后支撑架植入生物力学分析
3) supporting frame
支撑架
1.
In this method,the construction load and structure weight can be transferred to the below two structural layers through channel steel platform and stayed-cable,which can distribute the load effectively,decrease the influence of construction on structure and the dip angle of supporting frame,a.
该方法通过槽钢平台和钢丝绳拉索,巧妙地把施工荷载和结构自重传到下面两个结构层,分散了荷载,降低施工对结构的影响,有效减小了支撑架的倾角,提高了支撑架的稳定性。
2.
When a fastenerstyle steel pipe support frame was used as a highandthick floor formwork supporting system,engineers can add structural requirements to simplify the design calculation of the supporting frame.
扣件式钢管支撑架在高厚楼板支模应用时,通过增加构造要求可简化支撑架的设计计算。
4) bracing frame
支撑架
1.
The design and construction of the bracing frame of steel tube arch ribs in Yangmadao Bridge engineering are introduced from design scheme selection, construction technology and other aspects.
介绍了养马岛大桥钢管拱肋支撑架的设计与施工 ,从设计方案的比选、施工技术等方面进行了论述 ,指出该桥使用此种支架施工 ,保证了质量 ,降低了成
2.
With adoption of bracing frame,many technical difficulties in construction of space curved pipe truss with internal prestressing are successfully resolved.
东北师范大学体育馆屋面钢结构施工中,利用特制的轨道系统,使塔吊在有地下结构的楼面上行走自如,并结合使用支撑架,圆满地解决了体内预应力空间曲面钢管桁架施工所面临的许多技术难题,施工方法比较新颖,获得了非常好的效果。
5) bracket
[英]['brækɪt] [美]['brækɪt]
支撑架
1.
In the redesigned of the Intelligence Transform of Dual-flank Mesh Gear Tester, the paper analyses the design of the bracket used in supported the electrical machinery and simulates the c.
本文在齿轮双啮仪的智能化改造中,对用于支撑电机的“支撑架零件”设计进行了分析,利用大型通用软件ANSYS模拟支撑架的受力情况,使支撑架在满足使用要求的基础上,经济地使用材料,避免设计出的零件考虑不周全,顾此失彼。
2.
This paper analyzes the damaged microstructure and fracture of the bend carline plate s bracket for the truck by means of SEM.
应用扫描电子显微镜(SEM)对卡车地板梁支撑架受损组织及断口进行了分析研究。
6) brace
[英][breɪs] [美][bres]
撑架，支撑
补充资料：多孔陶瓷支撑体膜
分子式：
CAS号：
性质：在多孔陶瓷体上附着的微孔陶瓷膜层。膜层厚度一般在几微米到几十微米，外径孔径一般为0.1～0.5μm，个别也有厚度达3～5μm、孔径10μm的。多采用氧化铝、二氧化钛和二氧化锆等作膜材料。制法是：用电机带动陶瓷支撑体旋转，当溶胶液(膜材料)滴落在支撑体上，就会迅速地敷覆到支撑体表面，待溶剂蒸发、凝胶化和干燥成膜后，经热处理而制成氧化物薄膜。现已为食品(含饮料)、医药、生物技术和环境保护等领域开发利用。
CAS号：
性质：在多孔陶瓷体上附着的微孔陶瓷膜层。膜层厚度一般在几微米到几十微米，外径孔径一般为0.1～0.5μm，个别也有厚度达3～5μm、孔径10μm的。多采用氧化铝、二氧化钛和二氧化锆等作膜材料。制法是：用电机带动陶瓷支撑体旋转，当溶胶液(膜材料)滴落在支撑体上，就会迅速地敷覆到支撑体表面，待溶剂蒸发、凝胶化和干燥成膜后，经热处理而制成氧化物薄膜。现已为食品(含饮料)、医药、生物技术和环境保护等领域开发利用。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条