说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 耐碱液腐蚀性能
1)  corrosion resistance in alkaline solution
耐碱液腐蚀性能
1.
56 alloy with poor cyclic durability in alkaline solution is not for the practical use, because the corrosion resistance in alkaline solution of V3TiNi0.
但合金的耐碱液腐蚀性能差,导致合金循环寿命短达不到应用要求。
2)  resistance of acidic alkali and salt properties
耐酸碱盐介质腐蚀性能
3)  Germanium-bearing corrosive liquid
碱性腐蚀液
4)  corrosion resistance
耐腐蚀性能
1.
Preparation and corrosion resistance of Ni-W-ZrO_2 composite coatings by electrodeposition;
Ni-W-ZrO_2复合镀层的制备及耐腐蚀性能
2.
Effect of microstructure on the corrosion resistance of Zr-Sn-Nb-Fe zirconium alloy;
显微组织对Zr-Sn-Nb-Fe锆合金耐腐蚀性能的影响
3.
Effect of chemical conversion film plus electroless nickel plating on corrosion resistance of magnesium alloy;
化学转化膜上沉积镍对镁合金耐腐蚀性能的影响
5)  anti-corrosion property
耐腐蚀性能
1.
To test stainless steel wire rope with different compositions immerged in seawater and to analyze and discuss anti-corrosion property.
对不同成分的不锈钢丝绳进行海水全浸试验,对耐腐蚀性能进行分析和讨论。
2.
Many advantages as the magnesium alloys have, while the strength of the common one exists between 50-70% of the same aluminium alloys of the craftwork preparation, and the anti-corrosion property is very poor.
尽管镁合金有很多优点,但是一般镁合金的强度只有相同工艺制备的铝合金的50~70%之间,其耐腐蚀性能很差。
3.
The composition, structure, contact resistance and anti-corrosion property of the films were investigated.
与原始不锈钢相比,接触电阻降低1个数量级,耐腐蚀性能提高2个数量级。
6)  alkali corrosion resistance
耐碱腐蚀
1.
The assessment of coating alkali corrosion resistance was done through the measurements of weight loss and flexural strength degradation after 48h and longer exposure time in alkali vapor corrosion at 1000℃.
4ZP)涂层,采用XRD、SEM等分析手段研究了涂层的相组成和微观结构,并通过分别测定涂覆和未涂覆涂层试样在1000℃下受腐蚀后的质量损失和强度变化,对涂层的耐碱腐蚀性能进行了表征。
2.
4ZP) coating was deposited on SiC ceramic by slip dip-coating technique to improve its alkali corrosion resistance at high temperature.
4ZP)涂层,以改善其高温耐碱腐蚀性能。
补充资料:不锈钢的物理性能、力学性能和耐热性能
不锈钢的物理性能


不锈钢和碳钢的物理性能数据对比,碳钢的密度略高于铁素体和马氏体型不锈钢,而略低于奥氏体型不锈钢;电阻率按碳钢、铁素体型、马氏体型和奥氏体型不锈钢排序递增;线膨胀系数大小的排序也类似,奥氏体型不锈钢最高而碳钢最小;碳钢、铁素体型和马氏体型不锈钢有磁性,奥氏体型不锈钢无磁性,但其冷加工硬化生成成氏体相变时将会产生磁性,可用热处理方法来消除这种马氏体组织而恢复其无磁性。

奥氏体型不锈钢与碳钢相比,具有下列特点:

1)高的电阴率,约为碳钢的5倍。

2)大的线膨胀系数,比碳钢大40%,并随着温度的升高,线膨胀系数的数值也相应地提高。

3)低的热导率,约为碳钢的1/3。

不锈钢的力学性

不论不锈钢板还是耐热钢板,奥氏体型的钢板的综合性能最好,既有足够的强度,又有极好的塑性同时硬度也不高,这也是它们被广泛采用的原因之一。奥氏体型不锈钢同绝大多数的其它金属材料相似,其抗拉强度、屈服强度和硬度,随着温度的降低而提高;塑性则随着温度降低而减小。其抗拉强度在温度15~80°C范围内增长是较为均匀的。更重要的是:随着温度的降低,其冲击韧度减少缓慢,并不存在脆性转变温度。所以不锈钢在低温时能保持足够的塑性和韧性。

不锈钢的耐热性能

耐热性能是指高温下,既有抗氧化或耐气体介质腐蚀的性能即热稳定性,同时在高温时双有足够的强度即热强性。

不锈钢国际标准标准

标准 标准名


GB 中华人民共和国国家标准(国家技术监督局)

KS 韩国工业标准协会规格Korean Standard

AISI 美国钢铁协会规格America Iron and Steel Institute

SAE 美国汽车技术者协会规格Society of Automative Engineers

ASTM 美国材料试验协会规格American Society for Testing and Material

AWS 美国焊接协会规格American Welding Society

ASME 美国机械技术者协会规格American Society of Mechanical Engineers

BS 英国标准规格British Standard

DIN 德国标准规格Deutsch Industria Normen

CAS 加拿大标准规格Canadian Standard Associatoin

API 美国石油协会规格American Petroleum Association

KR 韩国船舶协会规格Korean Resister of Shipping

NK 日本省事协会规格Hihon Kanji Koki

LR 英国船舶协会规格Llouds Register of Shipping
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条