1) inhibitor
[英][in'hibitə] [美][ɪn'hɪbətɚ]
包覆层
1.
Research on Smog test & Characterizing Technique of Inhibitor;
固体推进剂包覆层烟雾测试与表征技术研究
2.
Research Progress on Inhibitor of Solid Propellant
固体推进剂包覆层的研究进展
3.
Although unsaturated polyester resin(UPR) inhibitor has many advantages,it also has some disadvantages,such as the large brittleness,the low elongation at low temperature(-40℃),and the poor matching degree with the propellant in respect of mechanical property.
针对U PR包覆层存在着固化物脆性大、低温延伸率低、与推进剂力学性能匹配差的缺点,提出将纳米T iO2均匀地分散在U PR基体中的共混改性方法,对U PR包覆层进行改性研究。
2) coating
[英]['kəʊtɪŋ] [美]['kotɪŋ]
包覆层
1.
Formulation investigation and property test of polyurethane(PU) coating applied to the propellant;
某推进剂用聚氨酯包覆层配方研究及性能测试
2.
Storage time of coating and integrality of adhesion between coating and propellant is important to the reliability of engine.
包覆层的贮存时间和它与推进剂粘结的完整性对于发动机工作的可靠性来说是非常重要的。
3.
By utilizing toluene diisocyanate(TDI) and liquefied diphenylmethane diisocyanate(MDI) to synthesize polyisocyanate,and then to synthesize the adhesive of polyurethane as main component of certain propellant coating,a coating with good mechanical property and low smoke & fog property is obtained.
利用2,4-甲苯二异氰酸酯(TD I)和液化4,4′-二苯基甲烷二异氰酸酯(M D I)合成聚异氰酸酯,进而合成聚氨酯黏结剂作为某推进剂包覆层的主要组分,使得该包覆层具有良好的力学性能和低烟雾性能等。
3) liner
[英]['laɪnə(r)] [美]['laɪnɚ]
包覆层
1.
Storage Test of the Liner of the Case Bonding Composite Solid Propellants Charge;
复合固体推进剂装药侧面包覆层贮存试验
2.
Adding molecular sieves to liner can remarkably improve the combination properties of the liner.
将分子筛添加于包覆层中,可显著提高包覆层的综合性能。
3.
The liner for double-based propellant was prepared from HTPB,toluene diisocyanate,diisooctyl sebacate,1,4-butanediol and mica.
以端羟基聚丁二烯(丁羟胶,HTPB)、癸二酸二异辛酯、1,4 丁二醇、绢云母、甲苯二异氰酸酯(TDI)等为原材料,制备了双基药柱用包覆层。
4) cladding
[英]['klædɪŋ] [美]['klædɪŋ]
包覆层
1.
Signal Processing Research for Rocket Motor Cladding Thickness;
火箭发动机装药包覆层厚度信号处理技术研究
2.
Testing System Design for Rocket Motor Cladding;
火箭发动机装药包覆层检测系统设计
3.
According to forming rule of metal during rolling,the thickness rate changing rule of cladding during hot rolling and cold rolling is studied.
揭示基体金属和焊层金属在热轧时的复合机理及成形规律,根据金属轧制过程中的变形规律,研究了热轧过程中及冷轧过程中包覆层的厚比变化规律,研究了铝合金钎焊板(箔)热轧复合工艺,开发出满足使用要求的铝合金钎焊板(箔)。
5) coating layer
包覆层
1.
n this paper,a method to study the combustion laws of propellant s external coating layer was put forward.
该文提出了研究包覆火药包覆层外层燃烧规律的方法，利用中止燃烧实验获得了火药包覆层外层燃烧时的ｐ－ｔ曲线及曲线，分析这些曲线的变化规律，讨论了温度和包覆层厚度对ｐ－ｔ曲线及曲线变化规律的影响，并得到了包覆层外层燃烧的燃速—压力关系式，这对建立包覆火药装药的经典内弹道模型、促进包覆火药装药技术的推广应用都具有重要意义。
6) two-coat
双包覆层
补充资料：包覆层
分子式：
CAS号：
性质：是推进剂用包覆层的总称。有四种类型。(1)propellant inhibiting 包覆在推进剂表面用以控制燃面的耐燃材料，见推进剂包覆层。(2)inhibiting layer 燃速测试中用以控制药条燃面的限燃材料，如醋酸纤维，聚乙烯缩丁醛。(3)1iner 早期国内把绝热层和推进剂之间的黏结剂也称作包覆层，现称作衬层。(4)coating 包覆在氧化剂表面以改善表面性状的表面改性剂。
CAS号：
性质：是推进剂用包覆层的总称。有四种类型。(1)propellant inhibiting 包覆在推进剂表面用以控制燃面的耐燃材料，见推进剂包覆层。(2)inhibiting layer 燃速测试中用以控制药条燃面的限燃材料，如醋酸纤维，聚乙烯缩丁醛。(3)1iner 早期国内把绝热层和推进剂之间的黏结剂也称作包覆层，现称作衬层。(4)coating 包覆在氧化剂表面以改善表面性状的表面改性剂。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条