说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 丙烯酸环氧树脂
1)  acrylated epoxy resin
丙烯酸环氧树脂
1.
A novel organo-silicone polyether polyols,taking vinyltrimethoxysilane and acrylated epoxy resin as monomer,was synthesized by means of solution copolymerization.
丙烯酸环氧树脂(AE)、乙烯基三甲氧基硅烷(VTM S)为单体,通过溶液聚合的方式合成了一种内聚能较大的新型有机硅聚醚多元醇,来改善聚氨酯软段的耐热性;研究了单体配比、反应温度、反应时间、引发剂量等因素对转化率的影响,得到了共聚物的较佳工艺条件;再通过氨类有机硅烷与聚氨酯预聚体进行反应,对聚氨酯进行硬段改性。
2.
The dipolymer using vinyltrimethoxysilane and acrylated epoxy resin as monomer was synthesized by means of solution copolymerization.
丙烯酸环氧树脂(AE),乙烯基三甲氧基硅烷(VTM S)为单体,通过溶液聚合制备了含有机硅氧烷的二元共聚物溶液。
2)  epoxy-acrylics
丙烯酸环氧树脂
1.
The curing process of an epoxy-acrylics based photosensitive resin under a 514 nm Ar + laser beam and the initiation of a synergistic photo-initiator composed of a dye, a tertiary amine and an UV photo-initiator was studied.
研究了在 5 14 nm Ar+激光下丙烯酸环氧树脂在染料、叔胺、紫外引发剂协同引发下的固化过程。
3)  epoxy acrylic resin
环氧丙烯酸树脂
1.
In this article the influences of catalyst、reaction temperature and inhibitors on synthetic reaction of epoxy acrylic resin, and effects of various active diluents, photoinitiators, promoters and substrates on the film properties were discussed, the finalized formulation of UV-curing coatings was given.
讨论了环氧丙烯酸树脂合成中的催化剂、反应温度和阻聚剂对反应的影响,以及不同活性稀释剂、光引发剂、促进剂和底材对涂膜性能的影响。
4)  acrylated epoxy resin
环氧丙烯酸树脂
1.
Study on UV-curing acrylated epoxy resin electrically conductive adhesives;
紫外光固化环氧丙烯酸树脂导电胶
2.
UV-Curable electrically conductive adhesives were prepared by using acrylated epoxy resin or polyacrylic resin as the matix and flaky siliver plated copper powder as the fillers.
以环氧丙烯酸树脂和聚丙烯酸树脂为基体、微米级片状镀银铜粉为导电填料制备紫外光固化导电胶,采用光引发剂与热引发剂复合引发体系实现导电胶的深层固化。
3.
UV curing adhesives can be preparated by using acrylated epoxy resin.
采用环氧丙烯酸树脂制备光固化胶粘剂,研究了胶粘剂各组分含量、引发剂配比、引发剂含量对固化时间和粘接强度的影响,得到了一种具有优良光固化性能和粘接强度的光固化胶粘剂。
5)  epoxy-acrylic resin
环氧-丙烯酸树脂
1.
This essay reported that taking the fine environmental protection water character epoxyacylic acid as the main matter of membrance,the color-changed paint of epoxy-propylence acid when headed can be made by the inorganic color-changed materials when heated were dispersed in the epoxy-acrylic resin.
用性能优良的环保型的水性环氧-丙烯酸树脂作主要成膜物质,将无机热变色材料分散于环氧-丙烯酸树脂中,制成环氧-丙烯酸热变色涂料。
6)  epoxy/acrylate resin
环氧/丙烯酸树脂
补充资料:甲基丙烯酸环氧树脂
分子式:
CAS号:

性质:又称甲基丙烯酸环氧树脂(methacrylate epoxy resin)含甲基丙烯酸酯结构的环氧树脂。具有厌氧特性,可耐酸、碱和氧化剂。可室温或加热固化,并有光固化和电子束固化特性。其层合板弯曲强度117.6MPa。热稳定性好,260℃加热192h热失重12.5%。由不同环氧树脂与甲基丙烯酸或丙烯酸酯化制得不同环氧丙烯酸酯,可再进一步制得热固性聚合物。主要用作感光树脂、油墨、层合板和胶黏剂等。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条