1) deformation force
变形力
1.
On the relationship between the deformation force of solid expandable tubular and model angle of expandable tool;
实体可膨胀管变形力与膨胀工具模角关系研究
2.
Calculation of rolling deformation force of three-ply cladding sheet;
三层复合板轧制复合变形力的计算
3.
Study on deformation and deformation force of flexible gear of harmonic wave gear transmission;
谐波齿轮传动柔轮变形与变形力研究
2) deforming force
变形力
1.
According to structure characteristic of three hinge double toggle matched mould mechanism for the REV100 injection blow molding machine,the relationship between the mechanism deforming force and mould shifting force have been analyzed.
主要结合REV 100型注塑(射)-吹塑机的三铰点双曲肘合模机构的结构特点,分析、讨论了一种非对称性特殊双曲肘合模机构的机构变形力与移模力的关系,研究了机构锁模条件,油缸推力与合模角关系,机构锁模调模特性及机构工作的特点。
2.
The deforming force distribution diagram can powerfully help us solve metal plastic deforming problems by means of model element method.
变形力分布曲线是用模型元法求解金属塑性成形问题的有力工具 ;而变形力分布曲线的建立又依据不同模型单元的力学模型。
3.
According to the viewpoint that the thinnest part of the deforming metal is usually the important and decisive part of the deforming force, the influence of the bridge size of the fash slot on the die forming and the deforming force is analyzed.
通过坯料在模锻型腔中的压挤成形过程 ,模拟开式模锻中飞边槽对金属充满型腔的作用 ,根据“变形金属最薄的部分常常是决定变形力的重要部分”这一观点 ,分析和探讨飞边槽桥部尺寸对模锻成形及变形力的影响 ,提出对高度较小、直径较大的齿轮以及复杂模锻件设计方法的改进 ,以提高该类锻件的模具寿命和生产率。
3) deformation pressure
变形力
1.
The calculation formulae of deformation pressure,workpiece density and sizes for upsetting,repressing,and closed die forging are derived based on the generalized plasticity theory of sintered powder materials.
应用粉末烧结材料广义塑性理论,研究和建立了该材料的镦粗、复压、闭式模锻变形力和工件密度、尺寸计算式。
4) deform force
变形力
1.
Through analysing the main factor that affects spinning technology deform force, this passage introduces the basic method of spinning technology force.
分析影响旋压工艺变形力的主要因素 ,介绍了确定旋压工艺力的基本方法。
2.
The optimization goal is to increase the deform uniformity of the forging while the deform force is decreased at the same time.
基于刚粘塑性有限元的基本理论,利用自行开发的优化设计程序,首次同时对锻件变形均匀性和锻件变形力进行了多目标优化设计,优化目标是在提高锻件变形均匀性的同时降低锻件的变形力。
5) resistance of deformation
变形抗力
1.
Results showed that high temperature resistance of deformation of 4Cr13 is not changed by adding copper and sulphur.
研究表明,铜、硫的加入未引起4Cr13钢变形抗力的改变。
2.
The curve of stress-strain of Q345 is found and then the resistance of deformation is obtained in different conditions when σ-(0.
2作为材料的屈服极限值,得到不同条件下的变形抗力值。
6) mechanical deformation
力变形
补充资料：变形力
变形力
deformation force
b ianxinglj变形力(deformation foree)金属塑性加工过程中，运动工具对变形材料的作用力。如徽粗时的锤头压力尸(见图)，轧制时的轧辊压力，拉拔时的夹钳拉力，挤压时挤压杆的压力。变形力是工作面上单位压力在工具运动方向上投影的总和: p二「。d尸eosa JF或尸二万FN兰 墩粗时的锤头压力尸、平均单位压力万及单位压力P式中尸为变形力;P为工作面上的单位压力;F为工作面积;a为单位压力与工具运动方向的夹角;FN为工作面在与工具运动方向垂直方向上的投影面积;万为在FN上的平均单位压力。 (陈家民)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条