1) oil-extended rubber
充油橡胶
1.
The oil-extended processing properties and the mechanical properties of the oil-extended rubber of high Mooney viscosity trans-1,4-polyisoprene with supported titanium catalyst system were studied.
采用干法充油工艺,对用负载钛体系催化异戊二烯本体沉淀聚合得到的高门尼粘度反式 1,4 聚异戊二烯(TPI)的充油工艺性能及充油橡胶的性能进行了研究。
2.
The Mooney viscosity of oil-extended rubber extended same amount of cycloalkyl oil increased with the increases of the Mooney viscosity of latex.
结果发现,调节叔十二碳硫醇用量可制备出具有不同相对分子质量的SBR1778胶乳;胶乳的门尼粘度越高,填充相同份数环烷烃油后其充油橡胶的门尼粘度也越高。
3) Oil Extended Rubber(OER )
油充橡胶
4) rubber filling oil
橡胶填充油
1.
A rubber filling oil was prepared by extracting a extract oil using furfural as solvent, where the extract oil was from the equipment of refining lubricant oil by solvent.
以糠醛为溶剂对抚顺石油一厂减五线馏分油溶剂精制的抽出油进行抽提,制备了橡胶填充油。
2.
The rubber filling oil was preparing using MEK dewaxed oil as raw material,adopting one stage serial connection hydrofining process with RJW-2 catalyst.
以炼油厂"老三套"生产的酮苯脱蜡油为原料,在装有RJW-2催化剂的加氢装置上采用一段串联加氢工艺研制生产橡胶填充油。
3.
The qualified 10B naphthenic type rubber filling oil is developed by taking hydrodeacidifying oil from Liaohe naphthene base vacuum cut 2 as raw oil.
经过实验室研究 ,以辽河环烷基减二线加氢脱酸油为原料 ,生产出合格的 10B高级环烷型橡胶填充油 ,产品通过了岳阳石化橡胶厂使用评定 ,10B高级环烷型橡胶填充油可以作为填充油生产SBS充油胶。
5) non-oil extended rubber
非充油橡胶
6) rubber extender oil
橡胶填充油
1.
The chromaticity, miscibility and anti-yellowing of SBS rubber extender oil produced by these technologies, which raw material was naphthenic-base or medium-base crude oil, could reach quality standard of the same overseas product and satisfy domestic market requiremen.
针对苯乙烯-丁二烯-苯乙烯嵌段共聚物(SBS)合成橡胶填充油质量要求与国内原油特点,开发了中压加氢处理、两段法高压加氢、全氢型流程与加氢精制等技术,并进行了工业应用。
2.
it can be used as active additives in vacuum distillation unit and solvent deasphalting unit, rubber extender oil and process softening agent in rubber industry,thermal conducting oil and printing ink solvent.
炼油厂重质芳烃油有多种化工用途,可作为蒸馏工艺强化剂、优化溶剂脱沥青工艺添加剂、橡胶工业的橡胶填充油和工艺软化油、工业导热油、黑色油墨溶剂油等。
补充资料：充油天然橡胶
分子式：
CAS号：
性质：采用湿法或干法充填充油的天然橡胶。充油量为25,30,40的充油天然橡胶分别为OE75/25、OE70/30和OE60/40。充油天然橡胶加工性能好，具有良好抗湿滑性能，适于作防滑软胎。
CAS号：
性质：采用湿法或干法充填充油的天然橡胶。充油量为25,30,40的充油天然橡胶分别为OE75/25、OE70/30和OE60/40。充油天然橡胶加工性能好，具有良好抗湿滑性能，适于作防滑软胎。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条