1) Moiré intervention method
几何云纹干涉
2) moire interferometry
干涉云纹
1.
Investigated stresses were relieved by cutting specimens along a radial direction, and additional strain fields created by relieving the stresses were measured using moire interferometry.
沿着径向将试件切割,以释放欲测的应力,同时用干涉云纹技术测量由于释放应力而引起的附加应变场。
2.
The residual stress distribution around cold expanded holes was measured by moire interferometry,the influence of reaming and fatigue on the residual stress were investigated experimentally.
应用干涉云纹测量了冷胀孔周残余应力分布，并用实验方法研究了铰孔和疲劳对残余应力的影响。
3) moire interferometry
云纹干涉
1.
The moire interferometry method and moire interferometry-finite element analysis hybrid method have been applied to study interface fracture behaviors of bimaterial specimen which is simulated to porcelain-Fused-to Metal (PFM) restoration.
本文利用云纹干涉法和云纹干涉一有限元混合法,对瓷修复体的模拟双材料模型界面断裂问题进行了实验研究。
2.
The thermal strain of bimetal soldering joint (Cu and Kovar) is analysed with moire interferometry method.
本文采用现代光测力学的云纹干涉法，对铜－可伐焊接件热应变问题进行了实验研究，确定了焊层的热应变特征，结果表明：由于热膨胀系数不匹配、焊层存在复杂的应力状态，它不仅受到焊板材料对它的剪切作用，而且受到纵向拉伸、挤压作用。
3.
Moire interferometry is an optical measurement which is noncontact and has big measuring range, wonderful fringe quality, real-time whole field measurement and high sensitivity, so it can measure the physical quantities about the tiny displacement and strain field of the surface of specimen accurately and effectively.
云纹干涉法是一种具有大量程、极好的条纹质量、非接触测量、实时全场观测和分析的高灵敏度的光学测量方法,能够对物体表面的微小位移和变形场等物理量进行精确有效的测量。
4) moiré interferometry
云纹干涉
1.
This study investigates a new 2-dimensional phase unwrapping method named RIPI (Regional Identification, partition and Integral phase unwrapping method), which is aiming at the problems of "line-draw" and loss of useful data while phase unwrapping in processing moiré interferometry experiment images.
本文针对实验力学云纹干涉图像去包裹处理中容易导致拉线的问题对RIPI(区域识别、划分和积分)去包裹法进行了研究。
2.
The technique of carrier modulation in Moiré interferometry is important in displacement measurement of an object.
在物体变形场的测量中,云纹干涉的载频调制技术有重要作用。
3.
Meanwhile, as a rapidly developing technique of photomechanics, moiré interferometry has attracted attention for its advantages of high sensitivity, excellent contrast, noncontact, real time, whole field, e.
云纹干涉法是一种高灵敏度、高对比度、非接触、实时观测、全场分析的光测力学实验技术；压电陶瓷智能结构以其力电耦合性强、线性控制、高灵敏低迟滞等优点在军工、民用、科研领域都得以广泛应用。
5) geometric moire
几何云纹法
1.
In the paper is analyzed in detail a special phenomenon of geometric moire:an amplification of the obliquity of moire stripes produced by two gratings of different grating line density to the angle between grating lines of the two gratings.
分析了几何云纹法的一种特殊现象 :异节云纹的条纹倾角对光栅栅线夹角的显著放大作用 。
6) moire interferometry
云纹干涉法
1.
Study of creep deformation of metal materials with moire interferometry;
金属材料高温蠕变变形的云纹干涉法实验研究
2.
Thermal deformation measurement of solder joints in surface mounted technique components using Moire interferometry;
表面封装技术组件焊点热变形的云纹干涉法研究
补充资料：秦云纹瓦当
秦云纹瓦当 一九七四、一九七五年，陕西咸阳秦都一号宫殿遗址出土。云纹是秦统一六国前后瓦当的主要纹饰。基本结构，在圆内划分内外圆，在两圆之间，绘各种纹样。如Q形云纹，在Q1顶部加弧线则变为I形；S云纹的一直线，分为二直线则为T形。有两种云纹瓦当，造型介乎云纹与动物纹之间。以卷云作蝉的翅膀，桃叶形纹样作蝉身，在蝉身前端两旁各有一小圆点是蝉眼。还有一种是六方对称的蝴蝶形云纹，以云纹作蝴蝶翅膀，柳叶形纹样作蝴蝶身，身前两端各有一小圆点为眼睛，姿态生动。从另一角度看，又为云纹。这些云纹，如∞、I1、T1型，为汉代沿用，只是汉代的纹样较粗一些。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条