说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 隔热材料
1)  heat insulation material
隔热材料
1.
By lab experiments,the heat insulation problems of blasting material have been researched,and the heat insulation material parameters have been determined.
通过室内实验,研究了爆破器材的隔热保护问题,确定了药包隔热材料的参数,并根据现场烟尘结焦爆破的情况制作了适合的隔热药包,取得了满意的爆破效果。
2.
The development of new pattern light carbon brick-high efficiency,high temperature heat insulation material and the applicating effect in electrical furnace line sturcture are introduced.
分析了国内还原性电炉炉衬结构存在的技术问题和破损原因 ,介绍了轻质炭砖这一新型高效高温隔热材料的研究开发及其在电炉炉衬结构中的应用效果。
2)  insulating material
隔热材料
3)  insulation material
隔热材料
1.
With the practical example in Guangdong LNG project,several insulation materials were comprehensively analyzed.
结合广东LNG项目的实例,综合分析了几种隔热材料的性能,从中进行选择,进而确定隔热结构,为同类型工程项目的隔热设计工作提供了参考。
2.
Silica aerogel is a light insulation material of high performance, which has important application for aerospace .
SiO2气凝胶在常温下是一种轻质高效的隔热材料,它在航空航天上有重要应用。
4)  thermal insulation material
隔热材料
1.
Preparations and properties of thermal insulation materials with rice husk coke;
稻壳焦隔热材料的制备和性能研究
2.
According to the microscope theories of heat conduction, a theoretical analgsis of heat conductionfactors for the high temperaturc thermal insulation materials was studied.
应用导热微观理论,对高温隔热材料诸导热因子进行理论分析,并对影响导热性能的显微组织、晶相组成和化学组份等物理化学因素开展了系统的实验研究,从而为预测和优化高温隔热材料的隔热性能提供了新的技术途径。
5)  adiabatic material
隔热材料
1.
Using cement,aedelforsite,perlite,fly ash and lots of admixtures,the authors make a kind of adiabatic material that its pressure stength reachs to 1 6MPa in 28d and its thermal conduction coefficient is 0 17 w/m.
K的煤矿深井巷道隔热材料 ,该材料具有较小的体积密度 ,较好的耐水性和抗干湿循环能力。
2.
A kind of new adiabatic material has been synthesized by combustion processes from powder mixture of Cr2O3,Al,and Al2O3.
以Cr2O3粉、Al粉、Al2O3粉为原料,利用燃烧合成方法,通过优化工艺参数,制备出耐高温、导热系数小、常温耐压强度高的新型隔热材料
6)  heat-insulating material
隔热材料
补充资料:隔热材料
      能阻滞热流传递的材料,又称热绝缘材料。隔热材料分为多孔材料和热反射材料两类。前者利用材料本身所含的孔隙隔热,因为空隙内的空气或惰性气体的导热系数很低,如泡沫材料、纤维材料等;后一种材料具有很高的反射系数,能将热量反射出去,如金、银、镍、铝箔或镀金属的聚酯、聚酰亚胺薄膜等。航空航天工业对所用隔热材料的重量和体积要求较为苛刻,往往还要求它兼有隔音、减振、防腐蚀等性能。各种飞行器对隔热材料的需要不尽相同。飞机座舱和驾驶舱内常用泡沫塑料、超细玻璃棉、高硅氧棉来隔热。导弹头部用的隔热材料早期是酚醛泡沫塑料,随着耐温性好的聚氨酯泡沫塑料的应用,又将单一的隔热材料发展为夹层结构。导弹仪器舱的隔热方式是在舱体外蒙皮上涂一层数毫米厚的发泡涂料,在常温下作为防腐蚀涂层,当气动加热达到200°C以上时,便均匀发泡而起隔热作用。人造地球卫星是在高温、低温交变的环境中运动,须使用高反射性能的多层隔热材料,一般是由几十层镀铝薄膜、镀铝聚酯薄膜、镀铝聚酰亚胺薄膜组成。另外,表面隔热瓦的研制成功解决了航天飞机的隔热问题,同时也标志着隔热材料发展的更高水平。
  

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条