1) coupling technique-properties
耦合工艺特性
2) coupling process
耦合工艺
1.
Study on catalytic distillation coupling process of isobutene oligomerization;
异丁烯齐聚反应精馏的耦合工艺研究
2.
Research on coupling process of short-cut nitrification and simultaneous nitrification and denitrification
短程硝化与同时硝化反硝化耦合工艺的研究
3) coupling characteristics
耦合特性
1.
Study on coupling characteristics of contactless power supply system for moving apparatus;
运动设备无接触供电系统耦合特性的研究
2.
Numerical calculation on a rocket-based combined-cycle(RBCC)powered cruise vehicle has been done to analyze the coupling characteristics based on 2-D inviscid compressible flow theory and one-step finite rate chemistry model.
以火箭基组合循环(RBCC)发动机为动力的高超声速巡航飞行器的气动力、推进系统、结构之间存在很强的耦合作用,文中基于二维无粘可压缩流理论和单步有限化学反应模型对此飞行器在巡航状态进行了一体化数值计算以分析这种耦合特性。
3.
UV uniform exposure can effectively vary the coupling characteristics of the annealed long period gratings (LPGs) in hydrogen loaded fiber.
写于载氢光纤上的长周期光纤光栅经过高温退火后 ,对其进行紫外均匀曝光能够有效改变其耦合特性。
4) interaction characteristic
耦合特性
1.
Relationship of relative gain and interaction characteristic of pipe network is analysed, to probe into the credibility of pressure difference control and to improve its energy-saving effects,relative gain of a air-conditioning water system is calculated , influence of pressure difference setpoint and its position to interaction characteristic of each branch is also discusseded.
为了探讨压差控制方式的可靠性 ,提高该控制方式的节能效果 ,通过控制领域中相对增益的概念 ,阐述了相对增益值与管路间耦合程度的关系 ,根据试验对一空调水系统的相对增益进行了计算 ,并分析了压差控制方式下变流量空调水系统中压差设定值及定压点位置对各支路间耦合特性的影响。
5) coupling
[英]['kʌplɪŋ] [美]['kʌplɪŋ]
耦合特性
1.
An analysis of the mutual coupling between the coaxial multi-mode horn of two chokes in the near field;
同轴双环多模喇叭收、发天线近场耦合特性分析
2.
Using progress of diffraction optics elements, analyzed the coupling future of Laser beam and optical fiber, experimented on optimize value and interrelated factors that light beam transform in optical fiber, and discussed the application of light beam commutation in laser flexible machining PCB.
运用衍射光学元件技术的进步,分析激光束与光纤的耦合特性。
6) technological characteristic
工艺特性
1.
Metal transfer and technological characteristic of typical titanium flux-cored wires at home and abroad;
国内外典型药芯焊丝的熔滴过渡及其工艺特性
2.
The stucture, mixing principle and mixing technological characteristics of new tenon type rotor with multi-rhombus were studied.
研究了新型多棱榫状转子的结构、混炼原理和工艺特性。
3.
Based on the analysis on technological characteristic of PMMA materials,the technological requirements in designing products and injection mould for PMMA materials were discussed in deˉtails.
在对PMMA材料工艺特性的分析及阐述的基础上,重点分析PMMA在制品设计、模具设计中的工艺要求,并分析其制品在注射成型生产中的工艺方法和特点。
补充资料:PC/ABS塑料特性、成型工艺、用途
PC/ABS 聚碳酸酯和丙烯腈-丁二烯-苯乙烯共聚物和混合物
典型应用范围:计算机和商业机器壳体、电器设备、草坪园艺机器、汽车零件仪表板、内部装修以及车轮盖)。
注塑模工艺条件:干燥处理:加工前的干燥处理是必须的。湿度应小于0.04%,建议干燥条件为90~110℃,2~4小时。熔化温度: 230~300℃。模具温度:50~100℃。注射压力:取决于塑件。注射速度:尽可能地高。
化学和物理特性: PC/ABS具有PC和ABS两者的综合特性。例如ABS的易加工特性和PC的优良机械特性和热稳定性。二者的比率将影响PC/ABS材料的热稳定性。PC/ABS这种混合材料还显示了优异的流动特性。
典型应用范围:计算机和商业机器壳体、电器设备、草坪园艺机器、汽车零件仪表板、内部装修以及车轮盖)。
注塑模工艺条件:干燥处理:加工前的干燥处理是必须的。湿度应小于0.04%,建议干燥条件为90~110℃,2~4小时。熔化温度: 230~300℃。模具温度:50~100℃。注射压力:取决于塑件。注射速度:尽可能地高。
化学和物理特性: PC/ABS具有PC和ABS两者的综合特性。例如ABS的易加工特性和PC的优良机械特性和热稳定性。二者的比率将影响PC/ABS材料的热稳定性。PC/ABS这种混合材料还显示了优异的流动特性。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条