1)  parameter adaptation
参数适应
2)  parameters adaptive control method
参数适应控制方法
3)  parameters
参数
1.
Calculation about kinetic parameters for non-isothermal crystallization of amorphous alloy based on thermal analysis techniques;
基于热分析的非晶合金非等温晶化动力学参数计算
2.
The Visual Teaching in the Measurement of Gear Parameters;
谈“齿轮参数测量”的直观教学
3.
Substituting adjustable parameters of machining cutter for the NC coordinates to machine special type of helicoid cutters;
增加调节参数代替联动坐标加工特种回转面刀具
4)  parameter
参数
1.
Parameter Determining of Crushing Experiment Numerical Simulation;
破碎实验数值模拟的参数确定
2.
Adjustment of speed and position parameters on motion control system of start-stop shear;
飞剪运动控制系统速度与位置参数整定
3.
Choice of parameter and calculation ways in designing dust-collecting sleeve;
袋式除尘器设计参数的选择和计算方法
5)  process parameter
参数
1.
Based on laboratory experiments and industrial trials on the 100 m2 sinter machine,it was found that sinter strength can be reached over 80 % by optimizing the raw material composition,adjusting process parameters and other measures such as controlling sinter basicity and silica content.
在实验室实验和工业性试验研究的基础上,通过对占入炉料80%以上的烧结矿进行优化原料结构、选择合理成分、调整工艺技术参数等一系列有效措施的实施,使得100 m2烧结机生产的烧结矿转鼓强度达到80%以上,粉率降低,使高炉透气性得到改善。
2.
On the basis of the study of laboratory experiments and industrial trials on the 100m2 sinter machine, it was found that the sinter strength could reached over 80% by optimizing the raw material composition, adjusting process parameter and adopting other means such as controlling the sinter basicity and silica content.
在大量实验室试验和工业性试验的基础上,通过对烧结原料结构进行优化、选择合理成分、调整工艺参数等一系列措施,使得太钢100m2烧结机生产的烧结矿转鼓强度达到80%以上。
3.
On the basis of the study of laboratory experiments and industrial trials on the 100m~2 sinter machine,it was found that the sinter strength could reached over 80% by optimizing the raw material composition,adjusting process parameter and other means such as controlling the sinter basicity and silica content.
在大量的实验室试验和工业性试验研究的基础上,通过对占入炉料80%以上的烧结矿进行优化原料结构、选择合理成分、调整工艺技术参数等一系列有效措施的实施,使得100m~2烧结机生产的烧结矿转鼓强度达到80% 以上。
6)  coefficient
参数
1.
Simulation of Repetitive Controller s Coefficient in UPS;
UPS逆变器的重复控制器参数的仿真分析
2.
The dry curve equations were fitted,the dynamics parameter,such as the critical water content,heat transmission membrane coefficient α,and quality transmission coefficient k_H,were calculated.
研究了一定条件下风速与风温对经烫漂预处理的洋葱薄层热风干燥过程的影响,拟合了干燥曲线方程,并计算了临界含水量、传热膜系数α与传质系数kH等动力学参数。
参考词条
补充资料:AAMD适应行为量表


AAMD适应行为量表
AAMD Adaptive Behavior Scale,ABS

  AAMD适应行为量表(A A M D A d aptiveBehavior scale,ABs)美国智力低下协会(A AMD)所出版的一个评定智力低下和情绪适应不良的量表。适用年龄从3岁起到成人。分A、B、C三式,A式为标准本,用十3岁至成人;B式为公立学校本(A BS一Psv),用于2一6年级;C式为学校增订版,用于3一17岁。评定21或24个领域:如独立能力,身体发育,经济活动,语言发展,数和时的观念,家务活动(仅A式有),职业活动,自我管理,责任感,社会化,暴力和破坏行为,反社会行为,反抗行为,不可信任的行为,退缩,刻板和古怪行为,不合适的人际态度,不能接受的陋习,自残行为(仅A式有),活动过度倾向,异常性行为(仅A式有),精神障碍,药物滥用。适应行为是诊断智力低下的一个重要依据,智力低下的定义是智商低下,适应行为受损,两者发生在成年前。智商依靠智力测验确定,适应行为依靠行为评定。AAMD适应行为量表便是为此目的而编的。AAMD提出的适应水平分六级。一级:在低的竞争环境中有一定的能力,但在个人事务管理上要有某些支持和监督;二级:在部分竞争或竞争环境中具有有效的社会和经济能力;三级:在无竞争或受保护的环境中具有有限的社会和经济功能:四级:对有限的环境和人际关系有反应,生计需要监督,在有帮助的情况下过机械的生活;五级:仅能对最简单的环境和人际关系有反应,生计与日常生活事物完全依赖他人监督;六级:在生理或姿势上有全面的残缺,需要不断的医学全护。 (龚雄先撰林传而审)
  
说明:补充资料仅用于学习参考,请勿用于其它任何用途。