1)  templet-making
制板
1.
The garment specification in outer orders is different from common size design, which decides the different templet-making methods.
外单加工的服装规格设置与常规的尺寸设计不同,这也决定了它们制板方法的不同。
2)  control plate
控制板
1.
In view of miss cropping cut and non-end cut of flying shear for bar as the malfunction of control plate of drive cabinet,the output high electric signal is turned over to low electric signal when the piece is detected by hot-metal detector,and the signal is changed to a 0.
针对棒材飞剪因传动柜控制板不正常而引起误碎断和不剪尾的问题,通过将热金属检测器检测到有钢信号时输出的高电平反相变为低电平,并当热金属检测器检测到轧件尾部信号下降沿时,将其变成一个宽度为0。
2.
The operation system, length, position of the control plate in a carding machine are analyzed, and some advice to the manufacture and choice of control plate is presented.
本文就高产梳棉机特殊吸风装置中的控制板的作用机理,控制板的长度、位置、隔距等进行分析,对有关制造厂和生产厂正确制造、选择、使用控制板具有一定参考价值。
3)  PCB
印制板
1.
Research on Boring Path Optimization of PCB;
印制板钻孔加工走刀路径优化
2.
Plasma Technology and Its Application in PCB;
等离子体技术与印制板生产中应用
3.
Approach to the Full-automatic PCB Printing Machine;
全自动印制板印刷机的探讨
4)  production pattern
服装制板
5)  printed circuit board
印制板
1.
The structural design, design parameters, material chosen and manufacture process of multi-pinhole compound die of main printed circuit board for large screen color TV are introduced.
介绍大屏幕彩色电视机主印制板多小孔复合模的模具结构、设计参数、材料的选用和制造工艺等。
2.
The process includes: (1) activating a palladium substrate after electroless palladiumplating on the printed circuit boards; (2) then electrolessly depositing gold onto an activatedpalladium substrate.
概述了印制板化学镀Pd/Au组合镀层工艺:(1)印制板化学镀Pd以后活化Pd表面;(2)在活化过的Pd表面上化学镀Au。
3.
The copper circuitry surfaces of printed circuit boards (PCB) which will be electrolessly nickel plated are activated by aqueous suspension of particulate zinc metal, and then the electroless nickel plating is carried out.
介绍了采用金属Zn粒子悬浮液活化要镀镍的印制板(PCB)Cu电路表面,使其可以进行化学镀镍的工艺方法,它可以克服Pd-Sn活化的缺点。
6)  printed circuit board(PCB)
印制板（PCB）
参考词条
补充资料：间断制板工艺
分子式：
CAS号：

性质：一种间断生产聚氨酯硬质泡沫复合板材的工艺。常用有压机注射法及垂直式复合板材成型法。前法是从发泡机混合头出来的原料，通过模具的注入孔注入模具空腔，模具空腔内已事先安放了面材，发泡熟化后从模具中取出板材；后法是从发泡机打出来的原料，通过软质料管沿板材长度方向来回移动。每移动一次，增加一定高度的泡沫，直到顶部。后一种方法主要用于制造大型的较厚的板材。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。