1) liquid-liquid circulating fluid bed
液液循环流化床
1.
Drop formation in liquid-liquid atomization processes is one of the key techniques of liquid-liquid circulating fluid bed (CFB).
液液雾化过程是液液循环流化床的关键技术之一,在流化床常态实验装置上,采用快速摄像与图像处理相结合的方法,获得了实验流量范围内液滴形成过程的图像以及形成液滴的粒径信息,运用数学分布函数对液滴的粒径分布进行了研究。
2) liquid-liquid circulating fluidized bed
液-液循环流化床
1.
Experimental study on mechanism of drops formation in liquid-liquid circulating fluidized bed for ice slurry production;
液-液循环流化床制取流体冰雾化机理实验
2.
Liquid-liquid circulating fluidized bed,which is a novel method of dynamic ice forming,was studied by using direct contact heat transfer between two immiscible liquids of water droplets and the coolant for ice storage system.
提出一种新型的液-液循环流化床动态制取流体冰方法,该方法采用水在另一种非相溶载冷液体中雾化形成细小水滴,水滴的运动主要受载冷液体的携带作用,水滴在循环流化床内流动过程中两相直接接触换热,水滴冻结实现制取颗粒流体冰目的。
3.
Liquid-liquid circulating fluidized bed(LLCFB) is a novel method of dynamic ice-making.
采用水与另一种非相溶载冷液体直接接触换热制取流体冰的液-液循环流化床是一种全新的动态制冰方法,在所建立的循环流化床试验台上针对制冰过程的关键问题——颗粒(液滴、冰颗粒)形成及其运动特性展开研究,研究过程中采用快速摄像与图像处理相结合的方法,获得颗粒形成及其沿程运动过程的图像以及循环流化床不同高度上颗粒的粒径信息。
3) liquid-solid circulating fluidized bed
液固循环流化床
1.
Distribution of solid particle in liquid-solid circulating fluidized bed;
液固循环流化床换热器中固体颗粒分布
2.
The ultrasound Doppler velocimetry (UDV) was used to investigate the transient axial velocity of particles and its time-averaged behaviors in a liquid-solid circulating fluidized bed.
利用超声多普勒测速仪实验测量了液固循环流化床中不同径向位置处颗粒瞬态轴向速度,研究了其概率密度分布特征。
3.
The velocity of the particle, the particle concentration and pressure drop of pipe have been studied with a CCD image recording and processing system in the experimental equipment of horizontal pipe liquid-solid circulating fluidized bed.
本文在水平管液固循环流化床实验装置上,利用CCD图像采集及处理系统对水平管液固循环流化床固体颗粒速度、浓度分布及稳定段的压降进行了研究。
4) liquid solid external circulating fluidized bed
液固外循环流化床
1.
An experimental apparatus of the liquid solid external circulating fluidized bed heat exchanger(LSECFBE),which made use of nozzle as the particle circulating device,was established.
以喷嘴为颗粒循环装置的液固外循环流化床换热器为研究对象,考察颗粒直径、口径比、喷嘴安装位置、颗粒初始加入量及流体黏度对主压降的影响,得出了稳定操作情况下,液固外循环流化床换热器主压降与上述因素之间的经验关联式,计算值与实验值吻合较好,为外循环流化床换热器的设计计算提供依据。
5) gas-liquid-solid circulating fluidized bed
气液固循环流化床
1.
Structural optimization pre-distributor in gas-liquid-solid circulating fluidized bed heat exchanger;
气液固循环流化床换热器中预分布器结构的优化
2.
The investigation on the self-organization of Gas-liquid-solid circulating fluidized bed can deepen the fundamental understanding of the system, as well as have far-reaching significance to quantitative description of the system.
本论文在对气液固循环流化床内的气泡、颗粒等的团聚行为及其运动变化规律等自组织现象深刻理解的基础上,以分形理论为桥梁,根据气泡间存在的作用力、颗粒间存在的作用力,提出分形假说,重构了三相循环流化床内流动时空结构图。
3.
As a novel separation facility for adsorption process, gas-liquid-solid circulating fluidized bed (GLSCFB) has extensive application prospect for its continuous operation, fast mass transfer and well contact between liquid-solid phases.
气液固循环流化床作为一种新型的吸附分离装置,具有操作连续化、传质速度快和液固相接触充分等优点,拥有广泛的应用前景。
6) three-phase circulating fluidized bed
气-液-固三相循环流化床
1.
Distribution of local phase holdups of gas-liquid-solid three-phase circulating fluidized beds;
气-液-固三相循环流化床局部相含率分布
补充资料：寒液
1.寒凉的液体。指眼泪﹑泉水﹑鼻涕等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条