1) Ni-P plating
Ni-P镀
1.
Through an introduction to the reaction principles and technical process of Ni-P chemical plating, and the investigation and analysis of anti-corrosive processing faults of Ni-P plating on the down-hole tool of present oilfields, some exact reasons are found out which causes the unstableness of anti-corrosive processing quality on down-hole tools.
对Ni-P化学镀的反应原理和工艺流程作了介绍,对当前油田井下工具的Ni-P镀防腐处理故障情况进行了调查分析,找出了井下工具防腐处理质量不稳定的具体原因,并提出了提高施镀基面的精度要求等相应的改进对策。
2.
The research situation and development direction of Ni-P plating on magnesium alloy were dis-cussed.
铜介绍了镁合金表面镀Ni-P的研究现状及发展趋势,镁合金表面采用Ni-P镀是一种很有应用前景的表面处理工艺。
2) Ni-P plating
Ni-P镀层
1.
In this paper the properties of electroless Ni-P plating are briefly described,and the application of this process in industry is fairly minutely introduced.
简述了化学镀Ni-P镀层的性能,并较详细地介绍了该工艺在工业生产中的应用。
2.
The Ni-P plating and Ni-P-SiC composite coating were prepared using electroless deposite method on the surface of low-alloy cast iron.
作者利用化学沉积法在低合金铸铁表面分别制取了Ni-P镀层和Ni-P-SiC复合镀层,并就两者的耐磨性与铸铁、磷化处理表面及Cr镀层的进行了对比试验研究。
3.
The acidic-alkaline composite deposits composed of alkaline Ni-P plating as bottom film and acidic Ni-P plating as top film could provide the best protection,and the corrosion resistance of single acidic Ni-P deposit was better than that of single alkaline Ni-P deposit.
5%NaCl溶液中的极化曲线,对比分析了酸性和酸碱复合条件下所得Ni-P镀层的表面形貌。
3) Ni-P coating
Ni-P镀层
1.
Effect of mechanical attrition on microstructure and property of electroless plating Ni-P coatings on magnesium alloy;
机械研磨对镁合金化学镀Ni-P镀层结构及性能的影响
2.
Effect of a Ni-P coating on the tensile strength of carbon fibers evaluated by a Weibull statistical method;
用Weibull统计方法评价Ni-P镀层对炭纤维抗拉强度的影响
3.
The impact of NH_4Cl,NaF and organic compound M on the deposition rate of Ni-P coating is discussed,and the surface morphology,adhesion and corrosion resistance against nitric acid of the coatings are investigated.
结果表明:三种物质都可以作为镀液的加速剂,合理控制它们的比例所形成的复合加速剂可以使加速效果达到最佳状态,而且此时的Ni-P镀层具有良好的表面质量、结合强度和耐蚀性。
4) electroless Ni-P plating
化学镀Ni-P
1.
Study of electroless Ni-P plating on the diamond;
金刚石表面化学镀Ni-P的研究
2.
The low temperature bonding between 95%Al2O3 ceramics and 45 steel was realized through first electroless Ni-P plating on Al2O3ceramic blocks and then soldering them to steel blocks with a low melting point filler metal of 63Sn-34Pb-2Ag-1Bi alloy.
采用化学镀Ni-P膜法金属化Al2O3陶瓷,并用63Sn-34Pb-2Ag-1Bi钎料膏实现了95%Al2O3陶瓷与45钢之间的低温钎焊。
5) Ni-P electroless plating
Ni-P化学镀
1.
The reaction mechanisms of Ni-P electroless plating and Ni-P-SiC composite electroless plating are researched, and the reaction thermodynamics are analyzed.
本文论述了Ni-P化学镀和Ni-P-SiC复合化学镀的反应机理,并对化学镀反应的热力学和动力学进行了分析。
2.
Ni-P electroless plating was adopted to encapsulate the as-received CaF2 in the preparation of precursor mixed powders of NiCr-Cr3C2-40%CaF2(wt.
%)复合合金粉末为原料,采用Nd:YAG激光熔覆技术,在γ-TiAl合金基体表面成功制备出了高温自润滑耐磨复合材料涂层,在复合粉体准备时,采用Ni-P化学镀包覆原始CaF2颗粒,以减少其在激光熔覆过程中的分解、蒸发和上浮。
6) electroless plating Ni-P
化学镀Ni-P
1.
In order to improve the deposition rate and anti-corrosion properties of electroless plating Ni-P on aluminum,effects of stabilizing agents and surface active agents on the deposition rate and corrosion resistance of electroless plating Ni-P were studied.
为了改善铝基体上化学镀Ni-P存在的镀速慢、镀层腐蚀性能差等问题,研究了稳定剂和表面活性剂对铝化学镀Ni-P镀层的沉积速度、硬度、孔隙率、结合力、耐蚀性、腐蚀电位、表面形貌等性能的影响。
2.
In order to improve the corrosion resistance of ZL101A alloy, the electroless plating Ni-P coatings with and without electroplating Cu layer were investigated by potentiodynamic polarization, salt spary test, SEM, microhardness meter.
为提高ZL101A合金的耐蚀性能,可直接化学镀Ni-P或电镀Cu后化学镀Ni-P在其表面施加镀层。
补充资料：聂聂（nièniè，音涅涅）
聂聂（nièniè，音涅涅） 聂聂（nièniè，音涅涅） 轻浮无力。《素问·平人气象论》：“平肺脉来，厌厌聂聂，如落榆荚。”
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条