1) the secondary short circuit
二次短路
1.
By analyzing the metallographical characteristic of the secondary short circuited melted bead fomed in different conditions,the law of the metallographical characteristic of the secondary short circuited melted bead changing by different conditions is obtained.
通过对在不同条件下形成的二次短路熔珠的金相组织分析,得出了二次短路熔珠随形成条件的不同金相组织的变化规律,找出了铜导线二次短路熔珠在消防射水影响下形成的金相组织与国家标准给出的二次短路熔珠不同的组织特征,并分析了形成不同于国家标准的特征的原因。
2) Secondary
二次
1.
Study on Secondary Seismic Acquisition in Southern Steep Zone in Biyang Depression;
泌阳凹陷南部陡坡带二次采集方法研究
3) two-step ejecting
二次推出
1.
Througn designing three axial slots in internal threaded portion and optimizing nib structure,a design was made on the injection mould with a two-step ejecting mechanism with non-rotating.
对笔尖内螺纹部分设计三段轴向开槽,优化笔尖结构,设计了二次推出不带旋转机构的自动脱螺纹注塑模。
4) reheating
二次加热
1.
Reheating Process for the Semi-solid A356 Alloy;
半固态A356合金的二次加热工艺研究
2.
Detection of the Reheating State of Semisolid Hypoeutectic Al-Si Alloy;
半固态亚共晶铝硅合金二次加热状态检测
3.
The effects of processing parameters of semi-solid billets preparation,reheating temperature and holding time on the semi-solid slurry microstructure of AlSi7MgBe alloy by liquidus semi-continuous casting were studied.
采用近液相线半连续铸造技术制备AlSi7MgBe合金半固态坯料,研究制坯工艺以及二次加热温度和保温时间对半固态浆料微观组织的影响,通过组织与性能分析对AlSi7MgBe合金的半固态触变成形性进行了研究。
5) secondary crack
二次裂纹
6) secondary dedusting
二次除尘
1.
The contact pattern of boiler auxiliary machinery was modified with the adoption of layer-by-layer coal charging technology,realizing secondary dedusting,improving the heat efficiency and reliability of boiler.
采用分层给煤技术,改造锅炉辅机连接方式,实现二次除尘,提高锅炉热效率和可靠性。
2.
Appropriate choice of top draft hood type is a key point for the modification project of secondary dedusting of converter off-gas at Xingtai Steelmaking Plant.
正确选定顶吸罩类型是邢钢转炉二次除尘改造治理的关键。
参考词条
补充资料：输出反馈(见线性二次型次优控制)
输出反馈(见线性二次型次优控制)
output feedback
3h日c卜口fon以以{输出反馈型次优控制。(output王eedbaek)见线性二次
说明：补充资料仅用于学习参考，请勿用于其它任何用途。