1) antifriction
抗磨减磨
2) energy-saving agent for anti-wear and anti-attrition
高效抗磨减磨节能剂
1.
determination of molybdenum,sulfur and phosphorus in organic molybdenum energy-saving agent for anti-wear and anti-attrition by the Inductively Coupled Argon Plasma emission spectroscopy was introduced.
利用ICP发射光谱技术对有机钼高效抗磨减磨节能剂产品中钼硫磷等元素含量进行测定,方法简便快速,结果准确,可用于有机钼润滑添加剂的生产控制及产品分析。
3) anti-wear
抗磨
1.
The results showed that the WADTP additive has special molecular structure including alkyl,aryl and amido,and has active elements such as S and P,can effectively improve the friction environment of metal surfaces and markedly increase the anti-wear and friction reducing ability of lubricating oil.
研究结果表明,WADTP添加剂具有烷基、芳基和胺基相结合的独特分子结构,并含有S、P等活性元素,能够有效地改善金属接触面之间的摩擦环境,增强润滑油的抗磨减摩性能。
2.
The extreme pressure & anti-wear performance of the organic molybdate containing no sulphur and phosphorus(Molybdate) in a paraffin base oil and formulated oils,and the anti-wear synergistic effects of the Molybdate with zinc dialkyldithiophosphate(ZnDDP) were investigated by using four-ball machine and the analytical tools such as scanning electron microscope(SEM) and frared spectrograph.
采用四球试验机考察了非活性有机钼在基础油和成品油中的极压抗磨性能以及与二烷基二硫代磷酸锌(ZnDDP)的极压抗磨协同作用。
3.
The change of structure and performance before and after adding the extreme-pressure and anti-wear agents into complex lithium and calcium base grease was studied.
通过复合锂钙基润滑脂在加入极压抗磨添加剂前后的性能及结构变化,研究了极压抗磨剂对润滑脂的影响。
4) wear resistance
抗磨
1.
The results indicated that the wear resistance and extreme pressure capacity of the base grease with dimercaptothiadiazo.
合成了含酯基的二巯基噻二唑二聚物,采用四球试验机考察了其在12-羟基硬脂酸锂基脂中作为极压抗磨剂的摩擦学性能,并采用XPS、SEM和EDS分析了摩擦表面的特性。
2.
Self lubricating cutter materials are excellent in antifriction and wear resistance.
自润滑刀具材料具有优异的减摩、抗磨性能 ,其开发与应用对提高切削加工生产率、降低加工成本、减少资源消耗、防止切削液污染环境、实现绿色加工具有重要意义。
5) antiwear
抗磨
1.
Study on the Performances of New Borated Mannich Base as Antiwear Additive;
硼酸酯化Mannich碱抗磨添加剂的性能研究
2.
The results show that this borate as additives possesses extreme antiwear performances,and it is a novel.
实验结果表明,合成的硼酸酯具有良好的抗磨性能,是一类新型无硫磷氮环保型润滑油添加剂;在摩擦过程中,硼酸酯添加剂在钢球表面形成了一层含硼膜,这层膜具有良好的摩擦性性能;硼酸酯添加剂具有良好的氧化安定性,加入添加剂后基础油的起始氧化温度增加18。
3.
According to the condition of material failure and mechanical equipment breakdown, a kind of tribo-treatment lubricant with excellent antiwear property and friction reduction property was developed based on tribochemical treatment technique.
针对摩擦磨损引起的材料失效和机械设备损坏状况,基于原位摩擦化学处理技术研制了一种抗磨、减摩和润滑性能优异的摩擦处理剂。
6) antisepsis and anti milling
防腐抗磨
参考词条
补充资料：磨绒
用砂磨辊使织物表面产生一层短绒毛的整理工艺，又称磨毛。磨毛织物具有厚实、柔软而温暖等特性，可改善织物的服用性能。变形丝或高收缩涤纶的针织物或机织物磨毛后，能制成一种仿麂皮绒织物；以超细合成纤维为原料的基布，经过浸轧聚氨酯乳液和磨毛，是制造人造麂皮的基本工艺。磨毛是利用金刚砂皮包裹的砂磨辊高速旋转，由砂粒的尖端将织物中纱线表面的纤维勾出并磨成绒毛。砂磨辊的砂粒大小、织物组织规格和操作条件要密切配合。例如，平纹织物如经纬密度均衡，磨毛时，由于纬纱与砂粒运动方向成90°，而经纱与砂粒运动方向平行，纬纱容易受到磨损，宜选用较细的砂粒和较低的张力，使织物与砂粒接触较轻。对于经纱密度高且屈曲波高大的府绸等类织物，砂粒与经纱的接触机会较纬纱多,磨毛时宜用较粗的砂粒和较大的张力,使织物与砂粒接触较重。同理,的斜纹织物比的斜纹织物容易磨毛。磨毛机有多辊或单辊两种。多辊式通常有 5只砂磨辊，每只砂磨辊都能单独驱动和正反向转动，并在砂磨辊前后装有与织物接触的张力调节辊。单辊式是由1只砂磨辊与1只橡胶压辊组成，可调节橡胶压辊的位置，控制织物与砂磨辊的接触情况。运转时砂磨辊内通以冷水，使磨毛时摩擦所生的热量及时散掉。磨毛的质量以绒毛的短密和均匀程度为主要指标。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。