说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 水冷
1)  water cooling
水冷
1.
Failure Research for the Water cooling System of ABB High Voltage Inverter;
ABB高压变频器水冷系统特殊故障的研究
2.
The tests included: water cooling manual arc welding cracking test with oblique Y-groove and water cooling submerged arc welding test using welding wire WQ-1 developed by the Technology Center of WISCO and sintered flux CHF101.
根据杭州湾大桥工程的要求 ,对武钢二热轧厂首批生产的 2 0mm厚管桩用钢Q345C -Hq进行了水冷焊接试验研究。
3.
The results showed that the bainite structure can be obtained by water cooling (90℃/s), its properties, special impact value can be remarkably improved.
对这种不含B的微合金钢 ,经水冷( 90℃ /s)可得到贝氏体组织 ,显著提高钢的力学性能 ,特别是冲击性能。
2)  water-cooling [英]['wɔ:təku:l]  [美]['wɔtɚ,kul]
水冷
1.
Discussion on the Special Topics of Water-cooling Hydro-generators and the Selection of Cooling Methods for Three Gorges Hydro-generators;
水冷水轮发电机特殊问题及三峡水轮发电机冷却方式选择
2.
The water-cooling two-stroke gasoline engine oil was developed from base oil made by sour crude,no peculiar smell kerosene,PIB with low molecular weight and some domestic additives including pour point depressant,antirust agent,antioxidant,antiwear agent and ashless dispersant,etc.
以中国石化茂名分公司生产的含硫原油基础油、无异味煤油和PIB为基础油组分,加入国产降凝剂、防锈剂、抗氧剂、抗磨剂和无灰分散剂研制出的水冷二冲程油具有较好的润滑性能和清净性能,达到TC-WⅡ规格要求。
3.
In order to get the different effect on steel ingot inner structure while using ultrasonic vibration under various conditions, the experiments compare with and without ultrasonic vibration on the water-cooling solidified paraffin ingot under different casting temperature and time, and gets a better ingot inner structure under a comparative lower temperature (<62 ℃) while the yield is reduced.
为了探索不同条件下使用超声振动对改善钢坯凝固组织结构的作用,试验对不同浇注温度、时间下有无超声振动的水冷凝固石蜡铸坯进行了对比研究,得到较低温度(62℃以下)时超声冷却对改善铸坯内部结构有很好的效果,但减小了收得率;浇注温度为72℃时,超声作用更多体现在搅拌石蜡液芯上,提高了铸坯的收得率,作用时间长时(20min)可以改善铸坯内部结构。
3)  water-cooled ['wɔ:təku:ld]
水冷
1.
The casting process of water-cooled copper metal mould for ductile iron camshaft is presented.
介绍了球铁凸轮轴水冷铜金属型铸造工艺,为了满足球铁凸轮轴的要求(QT700-2,铁素体≤50%),适当加入合金元素Cu、Sn,其中Cu控制在1。
2.
This paper introduced some specialties of shell-tube-styled water-cooled condensers in marine air-conditioners, especially analyzed the differences of this kind of conducer from that on land in such aspects as the material of heat exchange tube, design structure, rot proof technics and the effect of incrustation, etc.
介绍船用空调装置中壳管式水冷冷凝器的特点,着重分析了其冷凝器在换热管材质、设计结构、防腐工艺、水垢的影响等方面与一般陆用空调冷凝器的区别。
3.
Operations and maintenances of water-cooled generators are introduced in this paper.
从设计和运行的角度对大型水轮发电机采用空冷和水冷的方式进行了比较和探讨,并简要介绍了国内几家水内冷机组的运行和维护情况。
4)  water cooled
水冷
1.
It introduce the structure and principle of the mixed air cooled and water cooled door frame applying the cooling door frame can save energy ideally.
介绍了风冷兼水冷混合型冷却门框结构和原理 ,通过实际应用 ,取得了理想节能效果 ,证明了混合型冷却门框的实用
2.
Based on the detailed analysis of measurement error for the water cooled thermocouple, the design keys of reducing error were presented.
水冷式热电偶测量误差进行了详细分析,提出了减小该误差的设计要点;在某型发动机加力燃烧室扇形试验中的应用表明,该热电偶在1820℃以下,有效提高了测试精度(误差±1%),该热电偶测试数据可直接用于对燃烧效率的计算。
5)  cooling by water
水冷冷却
6)  Hydro pre-cooling
冷水预冷
补充资料:动力机械:水冷壁

敷设在锅炉炉膛内壁﹑由许多并联管子组成的蒸发受热面。水冷壁的作用是吸收炉膛中高温火焰或烟气的辐射热量﹐在管内产生蒸汽或热水﹐并降低炉墙温度﹐保护炉墙。在大容量锅炉中﹐炉内火焰温度很高﹐热辐射的强度很大。锅炉中有40~50%甚至更多的热量由水冷壁所吸收。除少数小容量锅炉外﹐现代的水管锅炉均以水冷壁作为锅炉中最主要的蒸发受热面。


 水冷壁按结构分为光管式和膜式两种。


 光管式水冷壁 由一般的锅炉钢管组成(图1 光管式水冷壁 )。管子排列越密对炉墙保护效果越好。炉墙广泛采用轻质耐火材料和保温材料。这些材料可以砌成炉墙﹐也可敷设在水冷壁上成为敷管式炉墙以便于安装。


膜式水冷壁 将鳍片管(或扁钢与光管)相互焊接在一起组成的整块管屏(图2 膜式水冷壁 )。它的优点是气密性好﹔管屏外侧仅需敷以较薄的保温材料﹐炉膛高温烟气与炉墙不直接接触﹐有利于防止结渣﹔管屏可在制造厂成片预制﹐便于工地安装。


水冷壁材料 一般用碳素钢。锅炉压力在14兆帕以上时也有部分用合金钢的。管子外径﹕自然循环锅炉一般用51~83毫米﹔多次强制循环锅炉和直流锅炉一般用22~60毫米。直流锅炉的水冷壁不像自然循环锅炉那样一定是直立式的﹐也可以是水平围绕或其它形式的。参数高时﹐尤其在直流锅炉中﹐为了在炉膛高热负荷区防止传热恶化﹐常采用内螺纹管或在管内装设扰流子(图3 内螺纹管和管内装扰流子 )。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条