说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 热补偿
1)  thermal compensation
热补偿
1.
Design of thermal compensation for hot runner in injection mould;
注射模热流道的热补偿计算
2.
General conditions for thermal compensation in optical systems;
光学系统实现热补偿的通用条件
3.
Based on the thermal expansion theory,through the analysis and comparison of the characteristics and the adaptation scope for various thermal compensation methods,and combined with the production practice in alumina plant,the cause of the rupture occurred in expansion joint was analyzed.
从管道的热膨胀理论出发,通过对各种热补偿方法结构特点、适用范围的对比分析,并结合氧化铝厂的生产实践,分析了膨胀节爆裂的原因,认为原设计采用波形膨胀节补偿热变形是不适宜的。
2)  heat compensation
热补偿
1.
Deep decarburization,degas,desulphurization,dephosphorization,deoxidation,inclusion removal and heat compensation integration are the key technologies to realize the multifunction of RH.
全面地总结了近20年RH精炼技术的发展,指出RH多功能化应是今后发展的主要趋势,其主要包括深脱碳、脱气、脱硫、脱磷、脱氧去除夹杂物和进行热补偿等5大功能,并提出研究开发多功能氧枪,将吹氧、喷粉和烘烤加热等技术集成一体是实现RH多功能化的技术关键。
2.
Based on heat expansion theory of tubes,through the contrasting analysis of structure characters and application scopes of different kinds of heat compensation methods,the reasons for the crack of the expansion joint are analyzed in this article with taking into account the production experience in alumina plant.
本文从管道的热膨胀理论出发,通过对各种热补偿方法结构特点、适用范围的对比分析,并结合氧化铝厂的生产实践,分析了蒸汽进口膨胀节爆裂的原因,认为采用波形膨胀节补偿热变形是不适宜的。
3.
The suggestion to optimize the design of heat compensation for pipe system was put forward according to the result of the computing.
利用该软件计算结果 ,可对现有或新设燃气输配管线热补偿设置提出优化或修正建议 ,亦可比较在输送不同燃气种类时温度场的分布情况 ,为设计人员正确设置热补偿装置提供依
3)  compensation of thermal expansion
热补偿
4)  thermal compensation error
热补偿量
5)  heat supply compensation
供热补偿
6)  thermocouple compensation
热偶补偿
补充资料:管道热补偿
      防止管道因温度升高引起热伸长产生的应力而遭到破坏所采取的措施。主要是利用管道弯曲管段的弹性变形或在管道上设置补偿器。
  
  利用管道的弯曲管段(如L形或Z形)的弹性变形来补偿管道的热伸长,称自然补偿,所能补偿的管段较短。
  
  补偿器有多种形式。套管补偿器(见图)的补偿能力大,外形紧凑,供热介质流动阻力小,但由于内装填料,需要经常检修,不能承受横向位移,且使支座承受较大的轴向推力,故多用于管径大于200毫米的直管段上(在给水工程中称伸缩管)。方形补偿器常用钢管煨弯或焊接制成,制造方便,不用经常维修,但供热介质流动阻力较大,外形尺寸也较大。波纹管补偿器结构简单,一般补偿能力较小,成对配置时可补偿弯曲管段的热伸长。球形补偿器本身可沿轴线旋转任意角度,通常以两个为一组来补偿管道的热伸长,补偿能力较大,易适应空间变动,供热介质的流动阻力也小,只是制造要求严格。(见彩图)  在中国,目前以自然补偿、套管补偿器和方形补偿器应用最为普遍。
  

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条