1) form stable phase change materials
形状稳定相变材料
1.
In this paper,according to phase transition mechanism,the so-called shape stabilized phase change materials are classified as solid-solid phase change materials(SSPCM)and form stable phase change materials(FSPCM.
根据相变机理将定形相变材料分为固-固相变材料(SSPCM)和形状稳定相变材料(FSPCM)两大类,进而按材料组成将SSPCM分作有机和无机两类,按载体材料不同将形状稳定相变材料分作聚合物FSPCM和多孔材料FSPCM两类,并分别介绍了各类定型相变材料所包含的物质种类、性能特点,叙述了各类材料的研究现状。
2) shape-stabilized phase change material
定形相变材料
1.
Encapsulation of shape-stabilized phase change materials(Ⅰ)——Preparation and characterization of n-octadecane shape-stabilized phase change materials/silica gel mini-capsules;
定形相变材料的胶囊化(Ⅰ)——正十八烷定形相变材料/硅胶胶囊的制备及性能
2.
Experimental research on shape-stabilized phase change material of butyl stearate/porous graphite;
硬脂酸丁酯/多孔石墨定形相变材料的实验研究
3.
A new kind of under-floor electric heating system with shape-stabilized phase change material(PCM) plates with air supply was put forward.
提出了一种利用定形相变材料蓄存夜间廉价电热,并能控制放热速率的地板下送风式相变蓄热电采暖系统。
3) form-stable phase change materials
定形相变材料
1.
The form-stable phase change materials(PCMs) of low melting point paraffin encapsulated in polystyrene(PS),polypropylene(PP) and polyethylene(PE) were prepared.
结果表明,石蜡经过高分子材料包覆之后,其相变温度有所降低,相变焓值有所提高,而且该定形相变材料可以加工成粉体材料,进一步拓展了产品的应用领域。
2.
The form-stable phase change materials(PCMs) of different content paraffin encapsulated by ethylene/vinyl acetate copolymer(EVA) and HDPE were prepared with heat melt way.
用乙烯-醋酸乙烯共聚物(EVA)和高密度聚乙烯(HDPE)作为包覆材料,石蜡作为相变材料,通过热熔法制备不同石蜡含量的定形相变材料(PCMs)。
4) form-stable PCM
定形相变材料
1.
Based on the experiments done in Beijing, the model of radiant floor heating system was modified with form-stable PCM as the thermal mass set up before.
在此基础上利用该模型研究了定形相变材料的熔点、相变潜热、相变半径及电加热功率等关键参数对相变贮能式地板辐射采暖系统热性能的影响。
5) shape-stabilized phase-change material
定形相变材料
1.
The phase change temperature,latent heat and the stability of shape-stabilized phase-change materials with different component were studied experimentally.
由石蜡和高聚乙烯构成定形相变材料 ,填加到墙体中可增加墙体的蓄热能力 ,节约能源。
6) Form-stable phase change materials (PCM)
定形相变材料(PCM)
补充资料：形状记忆合金加热相变过程
形状记忆合金加热相变过程
形状记忆台金(CuAll4Ni4)加热相变过程1．马氏体2．从中脊开始转变为母体3．4．马氏体逐渐缩小，鱼刺状结构最后消关
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条