说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> SAPO-5分子筛
1)  SAPO-5 molecular sieve
SAPO-5分子筛
1.
Study on the influential factors of SAPO-5 molecular sieve synthesis;
影响SAPO-5分子筛合成的因素研究
2.
Effect of the dosage of the template on the size and morphology of SAPO-5 molecular sieve microsphere;
模板剂的用量对SAPO-5分子筛微球大小和形貌的影响
3.
The status and tendency of study on SAPO-5 molecular sieve synthesis were reviewed.
综述了SAPO-5分子筛合成研究现状及趋势,介绍了SAPO-5分子筛的结构组成及各种合成方法,并详细讨论了SAPO-5分子筛合成中的主要影响因素。
2)  Structure of SAPO-5 molecular sieve
SAPO-5分子筛结构
3)  Palladium addition
载钯SAPO-5分子筛
4)  SAPO molecular sieve
SAPO分子筛
5)  silicoaluminophosphate molecular sieve(SAPO-5)
硅磷酸铝分子筛(SAPO-5)
6)  SAPO-34 molecular sieve
SAPO-34分子筛
1.
SAPO-34 molecular sieves were synthesized by hydrothermal method and were characterized by means of SEM and XRD.
采用水热法合成了SAPO-34分子筛,并用X射线粉末衍射仪和扫描电子显微镜对SAPO-34分子筛的结构进行了表征,同时探讨了黏合剂种类、甲醇分压、催化剂粒径和硅源等对SAPO-34分子筛催化甲醇制烯烃(MTO)反应性能的影响。
2.
SAPO-34 molecular sieve was synthesized from phosphoric acid,AlO(OH)·3H2O and silica sol with triethylamine or morpholine as templates by gas-phase crystallization.
分别以磷酸、拟薄水铝石和硅溶胶为磷源、铝源和硅源,吗啉和三乙胺为模板剂,采用气相晶化法在不同条件下合成了SAPO-34分子筛。
3.
Behavior of carbon deposition on SAPO-34 molecular sieve catalyst(abbreviate catalysts)in transformation of methanol to olefins was investigated in a fixed bed integral reactor.
在固定床积分反应器内考察了甲醇制烯烃反应过程中SAPO-34分子筛催化剂(以下简称催化剂)上积碳的生成规律,实验结果表明,随着反应温度的升高,催化剂积碳量呈指数规律增长,反应初始阶段的积碳生成速率很快,随后趋于平缓;用水作稀释剂,可以有效地减缓催化剂的积碳速率;催化剂床层内呈现明显的积碳分布,床层入口处的积碳量(质量分数)平均为9。
补充资料:10X分子筛
分子式:0.70CaO·0.30Na2O·Al2O3·(2~3)SiO2·6.0H2
CAS号:

性质:白色粉末。具有高的吸附性和抗毒性。由水玻璃、偏铝酸钠、氢氧化钠按一定摩尔比混合后,发生反应,经结晶,过滤,洗涤,加入氯化钙进行离子交换(交换率70%)再过滤,再洗涤,烘干,加入粘接剂捏合,成型,灼烧活化制得。用于气体、液体的干燥,气体中硫化物、二氧化碳的脱除,芳烃的分离,以及用作催化剂及载体。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条