1) JR resistance curve
JR阻力曲线
1.
The testing method of JR resistance curve is recommended,and the application of alloy steel with different heat treatment is given.
本文介绍JR阻力曲线的测定办法,并对不同热处理合金钢进行了实测。
2) resistance curve J R-Δa
JR-Δa阻力曲线
3) JR curve
JR曲线
4) JR-Δa curves
JR-Δa曲线
1.
In order to apply the experimental JR-Δa curves measured by standard laboratory specimens of steel X60 to real cracked components,the finite element analyses were performed for a single edge notched compact tension(CT) specimen and pipelines with axial surface crack.
为将实验室得到的X60钢标准试件的JR-Δa曲线的实验数据应用到实际裂纹构件中,对单边缺口紧凑拉伸(CT)试件和带轴向表面裂纹管道进行有限元分析。
5) R-curve
阻力曲线
1.
In this paper, the strength-indentation load relation was analyzed, a new method is proposed to define the point in the K-curve at which the R-curve intersect the points form the locus of the R-curve.
结果发现这种改进的包络线法与常规的包络线法所测得的阻力曲线相吻合。
2.
The R-curve of SiC/BN laminated ceramics was evaluated using the indentation-strength method and compared with that of the monolithic SiC.
采用压痕法在SiC/BN层状陶瓷试样的表面引入不同尺寸的表面裂纹,利用三点弯曲测量含裂纹试样的极限断裂应力,研究了不同尺寸的表面裂纹对层状陶瓷断裂强度的影响;根据压痕载荷-强度实验结果,测定层状陶瓷的阻力曲线,并与单相SiC陶瓷对比。
3.
The crack-growth-resistance (R-curve ) behavior of Al 2O 3-SiCw and Al 2O 3-TiCp ceramic matrix composites was estimated by the indentation-strength method .
采用压痕 -弯曲强度法获得了Al2 O3 -SiCw和Al2 O3 -TiCp两种复合材料的阻力曲线 ,结果表明 ,与基体材料相比 ,两种材料均呈现出明显的上升阻力曲线行为。
6) resistance curve
阻力曲线
1.
Study of single specimen COD resistance curve test by unloading compliance method;
单试样COD阻力曲线试验技术
2.
The resistance curves were measured with the standard three point bending specimens and the double edge notched tension specimens at different mis-matching welded joint.
对管线用钢焊接接头,测试了标准三点弯曲试样、同种接头及不同匹配状态的双边裂纹拉伸试样的阻力曲线。
3.
Finally, determination of ductile fracture toughness of high ductile metal using stretched zone and determination of critical fracture toughness by the point of intersection of the crack resistance curves and realistic blunting line are suggested.
最后建议对于高延性材料采用SZ法 ,用实测钝化线与阻力曲线的交点所对应的延性断裂韧度值作其临界
补充资料：Disperse Yellow JR for rapid dyeing
分子式：
CAS号：
性质：黄色均匀粉末。色泽鲜艳。相容性好。上染快。吸气率高。染色均匀。无色花。缸差小。脚水清。对异性纤维沾色少，可满足涤、棉的快速染色要求。由两种以上分散染料拼混而成。用于涤纶及其混纺织物的中、浅色的高温高压染色、喷射染色、溢流染色，可提高染色质量，缩短染色时间1/3。
CAS号：
性质：黄色均匀粉末。色泽鲜艳。相容性好。上染快。吸气率高。染色均匀。无色花。缸差小。脚水清。对异性纤维沾色少，可满足涤、棉的快速染色要求。由两种以上分散染料拼混而成。用于涤纶及其混纺织物的中、浅色的高温高压染色、喷射染色、溢流染色，可提高染色质量，缩短染色时间1/3。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条