1) scratch resistance
耐刮擦性
1.
The scratch resistance of nano alumina and nano silica without influence of film gloss and transparency and the long-term UV absorption of nano-zinc oxide are also briefed.
简述了纳米助剂的定义和制备,纳米氧化铝和纳米氧化硅助剂能显著提高涂膜的耐刮擦性而不影响光泽和透明性,纳米氧化锌助剂具有长效紫外线吸收性。
2) scratch resistance
耐刮伤
3) scratch resistance
耐刮伤性
1.
After being added in the wood coatings,the wax particles were homodispersed in the coating films,which could improve the tackiness resistance and the scratch resistance of coating films.
采用复配法将水性蜡助剂加入到水性木器涂料中,蜡助剂在涂料成膜时均匀地分散在整个涂层中,蜡助剂的加入能够显著提高漆膜的抗回粘性和耐刮伤性能,但是大粒径的蜡助剂会引起漆膜光泽的下降。
2.
The morphology and structure of the nanocomposite coatings were characterized by transmission electron microscopy(TEM) and small angle X-ray scattering(SAXS) method,while the scratch resistance by the gloss loss of the coatings film after washing.
以四乙氧基硅烷(TEOS)作为主要前驱体,通过改变溶胶-凝胶工艺参数制得了结构和形态各异的丙烯酸酯聚氨酯/SiO2纳米复合涂层,利用TEM、SAXS等手段表征涂层的结构与形态,由洗刷前后涂层的失光率来表征耐刮伤性,详细探讨了纳米复合涂层耐刮伤性与SiO2相特征、有机无机相作用力及SiO2质量分数之间的关系。
4) scratch-resistant
耐刮擦
1.
The mechanical properties and scratch-resistant properties of PC/ABS alloys could be improved obviously by adding nano-MgO particles.
添加纳米MgO后的PC/ABS合金与纯PC/ABS空白样相比,其拉伸、弯曲和缺口冲击强度及表面耐刮擦性能都得到了明显改善,其中合金弯曲强度可提高20%,缺口冲击强度可提高77。
2.
The scratch-resistant SiO2 antireflective coatings were prepared by dipping of the glass followed by a thermal curing at 700 ℃ taking place simultaneously with the glass toughening, using the base/acid two-step catalytic sol-gel process with tetraethylorthosilicate (TEOS) as precursor.
17％,在400-800nm的波长范围内平均反射率较镀膜前下降了5％以上,同时薄膜具有较好的耐刮擦性能。
5) mar-resisatant,scratch proof
耐刮的
6) scratch resistant coatings
耐刮伤涂层
1.
Organic-inorganic nanocomposite scratch resistant coatings for polycarbonate(PC)were successfully fabricated by evaporation induced self-assembly method.
利用挥发诱导自组装法制备了聚碳酸酯(PC)有机-无机纳米复合耐刮伤涂层,考察了基材处理方式、自组装液组成、涂装工艺等因素对自组装涂层厚度、透明性及耐刮伤性的影响。
补充资料：刮底
刮底 明清家具木雕工艺术语。铲地后用刀将花板底面刮平刮光，雕刻匠师称做“刮底”。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。