1)  particulates
铬膜层
1.
A sputtering equipment used for planes has been alternated to that for particulates (~100μm) by adding a rotating canister in its vacuum chamber.
运行结果表明,利用筒体旋转的方法,可以在粒度100μm左右的微粒表面包覆均匀完整的铬膜层,微粒形状对表面涂层的均匀、完整、涂层速度等有重要影响,微粒被筒体带动的力主要为二者间的分子间作用力,离心力起的作用很小。
2)  Cr film
铬膜
1.
Optical properties of Cr film spectroscopes;
铬膜分光镜光学特性的研究
3)  the chromium oxide film
氧化铬膜
1.
The inner-surface of equipment that contacts milk can be treated by chemical methods so that the chromium oxide film can be formed in air to prevent the equipment from corrosion, whereas the rust spots can be removed by passivity so that to avoid forming the pitting corrosion and to ensure the quality of milk products and prolong the equipment using life.
用化学方法处理液态奶接触的设备内表面形成氧化铬膜保护层而使设备不易腐蚀或与其他物质反应,同时通过钝化能够去除管路焊接时产生的氧化皮,提高表面防腐质量,延长设备使用寿命。
4)  Zn-Cr coating
锌铬膜
1.
Zn-Cr coating was obtained on the surface of sintered NdFeB permanent magnet by special solution immersion,removing excess solution,baking at 80±5 ℃ for 20 min and sintering at 290~310 ℃ for 30 min.
利用SEM,XPS,EDS和XRD研究了锌铬膜的微观形态和组成,测试了处理前后NdFeB永磁体的磁性能。
5)  zinc-aluminum-chromium coating
锌铝铬膜
6)  liquid of Zn/Cr film
锌铬膜液
参考词条
补充资料:铬酸盐膜
分子式:
CAS号:

性质:经铬酸盐处理后金属表面上形成的转化膜。铬酸盐膜对基体金属有一定的保护作用。此层膜的主要组分是三价铬与六价铬的化合物,以及基底金属的铬酸盐。三价铬与六价铬之比一般是28:8,六价铬越多,膜的耐蚀性越高。膜层为含水的复合物,可用Cr2O3·CrO2·xH2O表示。当加热到80℃以上,膜层会失水而产生大量毛细裂纹。耐蚀性激减。视不同的处理方法,膜可呈现透明或褐、棕黄、紫、黑等颜色。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。