1) walking beam furnace
步进加热炉
1.
This paper describes a hydraulic-balance walking beam furnace,which integrates one separate hydraulic balancing unit onto the normal hydraulic walking beam furnace.
本文论述的是一种液压平衡式步进加热炉,它在常规液压步进加热炉的基础上增加了一套独立的液压平衡装置。
2) walking beam heating furnace
步进梁式加热炉
1.
Author introduced furnace Construction Lining building and dry at a fire of walking beam heating furnace heats plate billet both up and down heating.
介绍了加热板坯用上下供热步进梁式加热炉炉型结构概况、炉衬施工及烘烤技术。
2.
The article discusses the characteristics of working beam heating furnace in broad and thick mill shop, and introduces the design circumstance of typical walking beam heating furnace.
文章论述了宽厚板轧机车间步进梁式加热炉的特点及发展趋势，并介绍了典型的步进梁式加热炉的设计情
3.
4 walking beam heating furnace in Wuhan Iron and Steel Company, the problems in the process of construction were analyzed, the removal boundary lines were generalized, and the issues during the installation process were discussed.
针对某钢铁公司3#、4#步进梁式加热炉节能改造工程,对施工过程中出现的问题进行分析,确定了改造工程中加热炉的设计拆除界线范围与实际施工拆除界线,对各种设备安装过程中出现的问题进行探讨。
3) walking beam reheating furnace
步进梁式加热炉
1.
Based on a walking beam reheating furnace,mathematical models of slab and hot skid were built in this paper.
以某钢厂的1座步进梁式加热炉为例,建立钢坯和垫块温度场的数学模型。
2.
This paper introduced the problem of walking beam reheating furnace Φ89 continuous mills Hengyang Valin Steeltube(group) Company Limited,and analyzed the cause.
介绍了衡阳华菱钢管有限公司Φ89连轧机组步进梁式加热炉存在的问题,并对其产生原因进行了分析,对燃烧系统的改造取得了良好的效
3.
In this paper, using mathematical model optimizing control on temperature setpoint of walking beam reheating furnace is put forward, an on line control mathematical model for billets thermal process and the ideal heat up curves are built.
针对步进梁式加热炉 ,提出对温度设定值采用数模优化控制 ,建立了钢坯热过程在线控制数学模型和理想加热曲线 ,以便精确控制钢坯出炉温度和温度均匀性 ,达到提高产量和节约能源的目
4) walking beam reheating furnace
步进式加热炉
1.
In order to meet the customer needs for that,under not reducing prodnct output and continnous frequently changing different steel mark semifinished prodnct as well as reducing operation cost and rising heating quality,it is first selected furnaec type that the walking beam reheating furnace with the digital pulse combustion control technology.
介绍了数字化脉冲烯烧控制技术在太钢1 549 mm0#加热炉上的实施方案及其实际应用效果,提出了为满足目前市场用户要求在不减少产量的情况下可连续频繁变换加热不同钢种的坯料,可灵活操作并有效降低操作成本和提高加热质量,步进式加热炉是当今应用数字化脉冲燃烧控制技术的首选炉型。
5) walking-beam furnace
步进式加热炉
1.
Analysis of the hydraulic system for walking-beam furnace;
步进式加热炉液压系统原理的优化设计分析
2.
Modeling and simulation of electro-hydraulic proportional control system with walking-beam furnace;
步进式加热炉电液比例控制系统建模与仿真
3.
This paper introduced the new-technology of walking-beam furnace was applied at the modern high speed wire rod mill of Xinyu iron and steel Co.
新钢公司高线厂在现代化线材轧机生产线上采用先进形式的步进式加热炉,实现高产、优质、低耗、无公害以及生产操作自动化。
6) walking beam furnace
步进梁式加热炉
1.
The characteristics,performance parameters and control system of walking beam furnace with regenerative burner were introduced.
介绍了本溪钢铁集团公司特钢厂蓄热式烧嘴步进梁式加热炉的特点、技术性能参数及对该炉的控制和管理情况,并介绍了蓄热式燃烧系统的主要特征。
2.
4 250 t/h walking beam furnace in Hot Rolling Plant, Benxi Iron and Steel Group Co.
论述了本钢 4号步进梁式加热炉汽化冷却装置的组成、基本原理、结构、达到的水平及应用效果。
3.
The paper approaches the model of following slab in walking beam furnace at the hot rolling mill of new steel & vanadium Ltd.
文章探讨了攀枝花新钢钒股份有限公司热轧板厂步进梁式加热炉板坯跟踪模型，建立此模型，有利于实现燃烧系统的自动控制，提高板坯加热质量。
补充资料：140t/h梁底组合步进式加热炉(上海第二钢铁厂)
140t/h梁底组合步进式加热炉(上海第二钢铁厂)
、护‘:一步进式力口热霹
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条