1)  porous
仿生多孔
2)  biomimetic
仿生
1.
Electrospinning of biomimetic regenerated silk fibroin aqueous solutions——part 1:processing parameters and structure properties;
仿生制备的再生丝素蛋白水溶液的静电纺丝(Ⅰ)——工艺参数及结构特性
2.
Progress of biomimetic process on the surface of biomedical metal materials;
医用金属材料表面仿生处理研究进展
3.
Surface Biomimetic Waterproof Modification of Chitosan Rod;
壳聚糖棒材表面仿生拒水改性的研究
3)  bionic
仿生
1.
Experimental research on identification of mine fire by using bionic smell sensors array;
仿生气味传感器阵列判识煤矿火灾的实验研究
2.
Study on WC/Cu Based Bionic, Non-smoothed, and Composite Coating;
WC/Cu基仿生非光滑耐磨复合涂层的研究
3.
Experimental research on a bionic propulsor with double tail-fins;
仿生双尾推进的试验研究
4)  bionics
仿生
1.
The applying of plants structure bionics in industrial design;
植物结构仿生学在工业设计中的应用研究
2.
Interpretation of Bionics and Solar Energy Utilization in Architecture;
仿生与建筑中太阳能利用的解析
3.
Analysis of Design of I.C.E.Piston Based on Design Bionics;
基于仿生设计学的内燃机活塞设计分析
5)  biomimetics
仿生
1.
A way that manufactured metallic material with fractal structure has been studied through biomimetics and fractal.
通过仿生、分形与材料制备相结合的途径,以天然分形材料海藻作为基底材料,利用化学沉积 和电沉积的方法,制备出具有明显分形结构的金属镍,用计盒维数法计算出其分形维数为1。
2.
A way of manufacturing metallic (Cu) material with fractal structure was studied using thebiomimetics and fractal concept.
从仿生的观点出发,选择具有分形结构的叉枝藻(海藻的一种)作为基底材料,经预处理后用化学沉积方法,先在海藻基底上沉积得到一层铜金属,之后再用电沉积方法,使基底表面的金属铜层加厚到一定程度(30~50μm),最后通过烧蚀去除包裹在铜金属中的海藻,从而得到较为纯净的具有分形结构的金属材料。
6)  biomimetic synthesis
仿生合成
1.
Preparation of calcium phosphate composite coating with chitosan by biomimetic synthesis;
镍钛合金表面含壳聚糖的钙磷复合涂层的仿生合成
2.
Research on Biomimetic Synthesis of Inorganics in an Aqueous Ternary-Additive System;
三元添加剂水溶液体系中仿生合成无机材料
参考词条
补充资料:多苯基多亚甲基多异氰酸酯
    多苯基多亚甲基多异氰酸酯,简称PAPI,或称粗MDI,浅黄色至褐色粘稠液体.有刺激性气味。相对密度(20℃/20 ℃)1.2,燃点218℃。PAPI实际上是由50%MDI与50%官能度大于2以上的多异氰酸酯组成的混合物。升温时能发生自聚作用。溶于氯苯、邻二氯苯、甲苯等。PAPI的活性低,蒸气压低,只是TDI的百分之一,故毒性很低。
    用于制造聚氨脂胶粘剂。也可直接加入橡胶胶粘剂中,改善橡胶与尼龙或聚酯线的粘接性能。贮存于阴凉、通风、干燥的库房内,远离火种、热源。严格防水、防潮,避免光照。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。