1) bottom blowing
底吹气
1.
The bottom blowing solution was put forward to solve the temperature accumulation in the plasma heating zone in a six-strand tundish.
针对宝钢六流连铸中间包等离子加热区域温度积聚严重的现象,提出了底吹气的解决方法。
2) bottom gas blowing
底吹气
1.
Flow control and inclusion removal in continuous casting tundish with bottom gas blowing has been studied in detail with water model,prototype of which is the one in Meishan Iron and Steel Cooperation.
以宝钢集团梅山钢厂1台连铸中间包为原型,采用水模型的方法对底吹气中间包内的流动和夹杂物控制进行研究。
3) oxygen bottom-blown
氧气底吹
1.
Practice of treating high-copper lead concentrats with oxygen bottom-blown furnace
氧气底吹炉处理高铜铅精矿的生产实践
4) bottom aero supplied strength
底吹供气强度
1.
Comparing non-isotherm rectification model with general cold model, the bottom aero supplied strength needed for mixing in the former model is apparently lower, approxi.
比较了非等温矫形模化实验结果与未考虑温度影响的常规等温模型实验结果,发现非等温矫形模化所需要的底吹供气强度明显降低,约为0。
6) bottom blow supplying setting
底吹供气装置
补充资料：顶底复吹转炉的炉底(正在倾炉出钢)(宝钢)
顶底复吹转炉的炉底(正在倾炉出钢)(宝钢)
顶底复吹转炉的炉底(正在倾炉出钢)(宝钢)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条