1) rolled steel blister
钢材起泡
1.
The method of orthogonal experiment was used to find the reason of rolled steel blister in panting pretreatment process if take sulfuric acid or hydrochloric acid as mordant.
本文介绍了利用正交优化法进行试验,找出涂装前处理过程中,用硫酸或盐酸做酸洗剂时,经常出现的钢材起泡的原因,并制定出了相应的预防措施。
2) foamer for refractory
耐火材料起泡剂
3) steel plate-foam material composite member
钢板-泡沫材料复合构件
1.
In order to meet the needs of engineering construction in cold plateau areas such as Tibet,steel plate-foam material composite member,which is light-weight,high-strongth and well insulated is developed.
为满足高原寒区特种地下工程建设的需要,研制和开发了轻质高强保温型钢板-泡沫材料复合构件,试验研究了复合构件的抗静载性能,取得了它的受力变形与破坏形态等试验结果,同时分析了这种构件的复合方法及拉筋构造方式对其承载性能的影响,为构件的实际应用奠定力学基础。
4) blistering
[英]['blɪstərɪŋ] [美]['blɪstərɪŋ]
起泡
1.
Cause analysis and countermeasures for blistering of heat insulating and corrosion resistant coat on the surface of tank;
储罐外壁隔热防腐涂层起泡原因分析及对策
2.
Coating Blistering Causes for Large and Medium Buses and their Preventive Steps;
大中型客车涂层起泡原因及预防措施
5) bubble
[英]['bʌbl] [美]['bʌbḷ]
起泡
1.
Analysis of bubble phenomenon on the worsted fabric;
精纺织物起泡现象的成因分析
2.
The performance of strippable membrane has been investigated in this paper The test is focused on the origin of bubble and the effect of stuffings on strippable membran
重点研究了试验过程中出现的起泡问题及填料对涂膜的作用。
3.
By the analysis of cut piece of billet C12200,a new view is put forward for tube surface bubble of phosphorous copper in the extrusion.
通过对C12200铸锭的切片分析,提出挤压过程含磷类管材表面起泡的新见解。
6) bubbling
[英]['bʌbl] [美]['bʌbḷ]
起泡
1.
Study on the mechanism of osmotic pressure bubbling from organic coating on metal;
金属表面有机涂层渗透压起泡机理的研究
2.
The structure and characters of complex ion-exchange membrane are related in brief;the reasons for bubbling and damage of ion-exchange membrane in the practical production are analyzed on the aspeets of lamination pressure,operational conditions and deposits.
简述复合型离子膜的结构、特点,认为离子膜在实际生产中起泡、损伤的原因有:层间压力、操作条件、沉积杂质,避免离子膜起泡、损伤能够采取的有效措施有:避免膜反向安装,保证阳极液NaCl质量浓度190～210g/L,阴极液NaOH质量分数30%～35%,减少开、停车次数,保证盐水质量及适宜的操作温度、压力。
3.
This article has discussed various causes, analyzing and judging methods and prevention measures of bubbling of coatings film of large &medial scale passenger buses.
介绍了大中型客车涂层起泡的各种原因、分析判断方法以及预防措施。
补充资料：普通钢材
普通钢材
plain carbon steel products
Putong gangCai普通钢材(plain earbon steel produets)硫、磷含量分别在0.035%一0.05%、碳含量在0.06%~。.38%范围内的碳素结构钢经塑性加工生产的合格产品。这类钢材塑性好，金属的变形杭力低，生产中能量消耗少，质量易于控制，工艺简单(基本工序只有加热、轧制和冷却三个阶段)，一般不经热处理直接使用，最早实现了生产的大型化、连续化、自动化、高速化，生产成本低廉。 普通钢材多以板带、型材和线材形式供应。普通钢材是工业上使用最早、用量最大的基本材料，广泛地用于建筑结构、桥梁构件、船体结构、交通运输、机械制造、农业、轻纺、国防工业、金属制品、食品工业、家用电器等国民经济各个部门。 (余芷芬)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条