1) gear-honing-tool
珩齿刀
1.
This paper introduces the technique of brazing nickel-plate CBN gear-honing-tool, and summarizes the process superiorityof brazing nickel-plate CBN.
介绍珩齿刀钎焊镀膜CBN制作工艺,概述了钎焊镀膜CBN的工艺优势,这种新型珩齿刀以其卓越的珩削性能将会逐步代替电镀CBN珩齿刀。
2.
This paper analyzes the defect in the present technical process of electroplating CBN gear-honing-tool, and gives some means of improvement.
对现有珩齿刀电镀工艺过程中出现的问题进行了分析,并提出了一些改进的方案。
3.
This paper introduced a new technique for making hardend tooth year-honing-tool—conventional CBN clectroplating combined with vacuum thermal diffusion, and studied the binding force between CBN composite deposit and matrix which affected mostly gear-honing-tool cutting life.
开发了电镀CBN埋砂法结合高温热扩散法制做硬齿面齿轮珩齿刀的新工艺。
2) honer
珩齿刀
1.
A method was introduced with Pro/E for the 3D modeling and automatic design of honer by making use of the powerful parameterization driver.
在P ro/E环境下利用其强大的参数化驱动功能,实现了珩齿刀的三维建模及其自动化设计。
3) gear honing tool
齿状珩齿刀
4) gear honing
珩齿
1.
Further more, the author puts forward a new gear honing method; In.
外啮合珩齿工艺是一种效率高、成本低的硬齿面齿轮加工工艺,但对齿轮精度的提高有限。
2.
The paper discussed the manufacturing technique of diamond dressing gear and analyzed the meshing condition of the honing ring profile and gear honing.
内啮合珩齿是硬齿面齿轮精加工的重要方法,技术难点之一是用齿轮式的金刚石修整滚轮对内珩轮进行修形,本文探讨了齿轮式金刚石修形轮的制作方法,应用空间啮合理论对内啮合珩齿修形及加工的啮合状况进行了分析,并用自制的金刚石修形轮在D 250 C内啮合珩齿机上进行了修形及加工试验。
3.
The wheel dressing and gear honing tests are carried out on an internal honing machine and an external honing machine with the homemade diamond dresser.
用自制金刚石修形滚轮在内、外啮合珩齿机上进行了修形及珩齿加工试验 ,结果证明其修形精度完全可满足珩齿加工要
5) honing
[英][həun] [美][hon]
珩齿
1.
Ultrasonic parallel-axes honing is a new machining method of gear-honing.
超声波平行轴硬珩齿是一种新型的齿轮精加工方法。
2.
Therefore, the improvement of honing technology lays great importance on precise gear manufacture.
珩齿是硬齿面齿轮的高效率精密加工方法之一,在齿轮精密制造中起着很重要的作用。
6) gear-honing
珩齿
1.
Test Research of Vibration Energy Based on Ultrasonic Gear-honing;
基于超声珩齿的振动能量测试研究
2.
Based on the theoretical analysis for the new-style composite horn in the ultrasonic gear-honing system,FEM is used to analyze the modal of the horn with ANSYS,and built a set of apparatus for experimental measurements.
在对超声珩齿系统中新型复合变幅杆进行理论分析的基础上,采用有限元软件ANSYS对变幅杆作了模态分析,并建立了一套超声振动谐振频率测试系统。
3.
Referring to the theory and application of ultrasonic and the technique of hardened-gear-honing and research of cutter, ultrasonic-based gear-honing is brought forward.
超声波辅助珩齿，是在长期从事超声波理论和应用及硬珩齿工艺和刀具研究的基础上提出来的。
补充资料：珩齿机
利用齿轮式或蜗杆式珩轮对淬火圆柱齿轮进行精加工的齿轮加工机床。珩齿机是按螺旋齿轮啮合原理工作的，由珩轮带动工件自由旋转。珩轮一般由塑料和磨料制成。珩齿(见齿轮加工)的作用是降低齿面粗糙度，在一定程度上也能纠正齿向和齿形的局部误差。珩齿生产效率较高。珩齿机广泛应用于汽车、拖拉机和机床等制造业。珩齿机按所用珩轮的型式分为两种。①齿轮珩轮珩齿机：它的结构布局近似于剃齿机，分为珩轮位于工件上面和珩轮位于工件后面两种型式。加工时珩轮与工件呈交叉轴啮合状态，工件由珩轮带动旋转，同时工作台作纵向往复移动。工作台每一往复行程，珩轮反向一次，从而加工出齿的全长和两齿侧面。②蜗杆珩轮珩齿机：它的结构布局近似于蜗杆砂轮磨齿机，但在蜗杆珩轮和工件之间没有传动链联系，由前者带动后者作自由旋转。（见彩图）
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条