说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 高温充氧氧化
1)  oxidated in high temperature oxygenation
高温充氧氧化
2)  high temperature oxidation
高温氧化
1.
Effects of high temperature oxidation on composition and structure of microarc ceramic coating on Ti alloy;
高温氧化对钛合金微弧氧化陶瓷膜组成与结构的影响
2.
High Temperature Oxidation Behavior of Cu-Si Alloy Prepared by Different Techniques;
不同方法制备的Cu-Si合金的高温氧化行为
3.
Effect of Ce on high temperature oxidation resistance of Fe-Cr-Al alloy;
Ce对Fe-Cr-Al合金抗高温氧化性能的影响
3)  high-temperature oxidation
高温氧化
1.
Effect of high-temperature oxidation on mechanical properties of Sc-Si-Si_3N_4 ceramics
Sc-Si-Si_3N_4陶瓷高温氧化对其力学性能的影响
2.
Morphology of high-temperature oxidation was observed with scanning electron microscope.
利用失重法对316L奥氏体不锈钢纤维的高温氧化动力学进行了研究,通过对氧化动力学曲线的分析可以得出:700℃时因氧化反应动力学曲线一直呈上升趋势,直至120h后曲线开始平缓;900~1000℃时氧化到一定阶段后,因氧化物(MoO3、Cr2O3等)的挥发均呈现一个下降趋势,之后氧化达到饱和状态基本不再变化;且达到饱和的时间随温度升高而减少。
3.
An Al-Si fusing coating was successfully produced by low-oxygen pressure high-temperature fusing technology for improvement of the high-temperature oxidation resistance of Ti alloys.
采用低氧压高温快速熔结技术在Ti-6Al-4V合金表面成功地制备出具有抗高温氧化能力的Al-Si熔结涂层。
4)  oxidation [英][,ɔksi'deiʃən]  [美][,ɑksə'deʃən]
高温氧化
1.
Effect of Grain-size Reduction on Oxidation Benavior of Co-5Y Alloy;
晶粒细化对Co-5Y合金高温氧化性能的影响
2.
Oxidation Behaviors of Two Nickel-based Alloy Coatings Used in Power Plants at High Temperatures;
电厂锅炉防护用两种镍基合金涂层高温氧化行为研究
3.
Research on the Oxide Mechanism and Preventing Technology of Oxidation for 9Cr-1Mo-V-Nb Steel
电站9Cr-1Mo-V-Nb钢高温氧化机制及防护技术研究
5)  oxidation resistance
高温氧化
1.
It was found that theAl2O3-Y2O3 composite coating has excellent oxidation resistance in air at 600℃ and s.
采用氧化增重法研究了Fe-5Cr合金基体材料及其涂层的抗高温氧化及硫化性能。
2.
The high temperature oxidation test showed that the oxidation resistance of TiAl alloy was enhanced markedly by the coatings.
用等离子喷涂法在TiAl合金基体表面喷涂得到由CoNiCrAlY粘结层和ZrO2+Y2O3陶瓷外层组成的双层结构的热障涂层,进行了高温氧化试验并用SEM和光学显微镜观察分析了涂层的组织及形貌。
6)  aerobic oxidation
充氧氧化
补充资料:高温抗氧化涂层
分子式:
CAS号:

性质:高温下能阻止或减少氧化气氛对材料表面氧化的涂层总称。按其抗氧化作用的时效和被保护基体抗氧化的要求,分为暂时性抗氧化和长期抗氧化涂层两类。按其组成,有硅化物涂层、铝化物涂层、高温搪瓷涂层、高温烧结涂层等。涂层的保护作用是由于涂层是一个能阻止氧化气氛扩散的阻挡层。这类涂层可使工件能在原先不能工作的环境中使用,或可延长工件的使用寿命。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条