1) deep drawing
深冲
1.
Research on annealing process of 2B06-O aluminium alloy sheets for deep drawing;
深冲用2B06-O铝合金板材的工艺研究
2.
FE simulation and experimental study of the deep drawing of 5A02 aluminum sheets
5A02铝合金板料深冲有限元模拟与实验研究
3.
In this article we describe the development and characteristics of deep drawing quality hot dip galvanizing strip and analyze the influence of processing values on product properties, give the main points on controlling the quality of products.
阐述了深冲热镀锌板的发展趋势和生产工艺特点。
2) deep-drawing
深冲
1.
The effect of rolling process on the microstructure and mechanical properties of deep-drawing molybdenum strip was investigated in this paper through changing rolling temperature and rolling process.
通过轧制温度、轧制方式实验,以及织构和力学性能分析,研究了轧制工艺对液晶显示背光源用的深冲钼带的组织和性能的影响。
3) scour depth
冲深
1.
Discussion about upper flow depth influencing the scour depth around piers;
上游行近水深对桥墩冲深影响的探讨
2.
Based on the analysis of computing formulas of scour depth around spur dikes all over the world and the characteristics of hydrology and sediment in the Yangtze River Estuary, a suitable computing model for the scour depth around a typical spur dike in the Yangtze River Estuary is elaborated in the paper .
探讨了适合于长江口典型丁坝坝头最大冲深计算的模式 ,为丁坝坝头冲刷坑深度计算和判断冲刷坑的稳定性提供依据 。
4) deep drawability
深冲性能
1.
The effects of processing parameters of ferritic rolling on microstructures and mechanical properties especially on deep drawability of ultra-low carbon and Ti-stabilized interstitial-free steels were investigated,and the precipitates in Ti-IF steel were also analyzed.
本文研究了铁素体区轧制工艺条件对超低碳(ULC)钢和钛处理的无间隙原子(Ti-IF)钢组织和性能,特别是对深冲性能的影响,并分析了Ti-IF钢中的析出物。
2.
The cross-section metallurgic structure at various annealing temperature is analyzed and compared with import material based on the statistical study of the influence of annealing temperature on the deep drawability of cold rolled IF steel.
在统计分析退火温度对冷轧 IF 钢深冲性能的影响的基础上,对不同退火温度下的断面金相组织亦进行了分析,并与进口料进行了对比。
3.
Interstitial-Free (IF) steels which represent a new generation of deep drawing steels have been widely used as raw materials of automobile sheet because of its excellent deep drawability and no-aging property.
无间隙原子(IF)钢作为最新一代冲压用钢,具有十分优异的深冲性能和非时效性,被广泛用作汽车板等冲压件的原料。
5) drawability
[,drɔ:ə'biliti]
深冲性能
1.
The effect of the reduction in cold rolling IF steel sheet for drawability;
冷轧压下率分配对IF钢深冲性能的影响
2.
The results showed that the IF steel has better deep drawability,higher mechanical and texture strength and elongation if the hot rolling temperature was low with big reduction in ferrite region.
结果表明,较低的铁素体轧制温度和较高的铁素体区压下量时,IF钢具有更高的深冲性能、相对较高的强度、延伸率以及织构强度。
3.
How the processing conditions affect the properties especially the drawability of a ferritic hot-rolled and annealed Ti-IF sheet steel was investigated.
研究了铁素体轧制工艺条件对一种Ti-IF钢的性能,特别是深冲性能的影响。
6) deep-drawing property
深冲性能
1.
Effect of cold rolling-process on microstructure and deep-drawing property of 1050H19 aluminum foils used in air-conditioner;
冷轧工艺对1050H19空调箔微观结构及深冲性能的影响
2.
The relationship of deep-drawing property and rolling parameters of IF steel was researched by the testing of ferritic rolling and annealing.
通过对IF钢铁素体区轧制、退火工艺的研究及对塑性应变比r值的检测,并结合对取向分布函数图的定量分析,研究了深冲性能与轧制工艺参数的关系。
补充资料：深冲钢deep
drawingsteel：适合于深冲加工方法制造制件用的薄钢板或钢带。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条