说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 激光表面熔覆
1)  laser surface cladding
激光表面熔覆
1.
The laser surface cladding technical the principle,the characteristic was elaborated,the use laser surface cladding technology to repair the DA540-41 compressor rotor the practice process was introduced.
阐述了激光表面熔覆技术的原理及性能特点。
2.
Laser surface cladding is a remanufacturing techneque being used in the fields of parts hardening,modification,repair,and so on.
激光表面熔覆作为一种再制造技术手段被应用于零件表面的修复和强化。
2)  laser cladding
激光熔覆
1.
In-situ synthesis of Co_p/Cu composite coating by laser cladding;
激光熔覆原位合成Co_p/Cu复合涂层
2.
Research progress of laser cladding on the surface of magnesium alloys;
镁合金表面激光熔覆研究现状
3.
Influence of rare earths on Fe-based amorphous composite coatings by laser cladding;
稀土RE对激光熔覆Fe基非晶复合涂层的影响
3)  laser-cladding
激光熔覆
1.
Research of preventing the edges of tooth surface from collapsing in laser-cladding process;
齿面激光熔覆中的防边缘塌陷工艺研究
2.
Microstructure and Tribology Characteristics OF Laser-cladding Composite Ceramic Coating;
纳米复合陶瓷涂层激光熔覆后的组织与耐磨性能
3.
The WC–Ni–P composite coatings were made by laser-cladding on 1045 steel substrate.
利用激光熔覆技术在45钢表面制备了WC/Ni–P复合涂层,在Plint TE–66微磨料磨损试验机上进行了磨损试验,研究了不同稀土含量(CeO2)以及不同粒度WC粉末对涂层熔覆性能、硬度和磨损性能的影响。
4)  laser clad
激光熔覆
1.
Microstructure and wear resistance of laser clad layer of TiN on TC4 alloy;
TC4合金表面TiN陶瓷激光熔覆层的组织和耐磨性能
2.
Effect of nano-CeO_2 on the microstructure and properties of laser clad nickel-based alloy coating;
纳米CeO_2对激光熔覆Ni基合金层组织与性能的影响
3.
Study of laser cladding three pre-placed powders on titanium alloy;
钛合金表面三种预涂材料的激光熔覆研究
5)  laser coating
激光熔覆
1.
Experimental investigation of cracking behaviors in laser coating of Ni-based WC composite;
Ni基WC金属陶瓷激光熔覆开裂特性的试验研究
2.
The organization of laser coating thermal influence region of steel 20 in annealing and quenching is studied.
本文研究了 2 0钢退火态 ,淬火态激光熔覆热影响区的组织 ,电镜复型照片显示 ,在 30微米的热影响区内组织变化呈明显的规律 ,熔覆层与基体间有明显的界
3.
On the basis of an analysis on the feeding pattern of the coating material and its behavior in the laser beam during the process of laser coating with automatic powder feeding, a heat equilibrium equation was established and expressions relating the parameters in the process were obtained.
在分析自动送粉式激光熔覆过程中熔覆材料颗粒加入方式及其在激光束中的行为的基础上,建立热平衡方程,推导出反映熔覆过程实际情况的参数:熔覆材料颗粒尺寸、在激光束中运动距离、加热温度、激光功率密度之间的相互关系式等。
6)  surface cladding
表面熔覆
补充资料:熔盐电化学表面合金化
分子式:
CAS号:

性质:其实质是熔盐中金属的电沉积和固态扩散合金化两种作用的综合。当在熔盐中使用活性较强的金属作为阳极,以活性较弱的金属作为阴极,并将阴、阳极连成回路,则形成一个自发的原电池。阳极在熔盐中溶解,其离子在阴极表面放电析出。与此同时,于高温下在基体(阴极)表面沉积的合金元素向内部扩散形成固溶体或金属间化合物的表面合金层。通过改变基体金属和被沉积金属,可以获得具有特殊性质的表面合金,性质远优于单个金属。铌、钽、铝、铍、硅等的表面合金化已在高技术领域中得到了应用。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条