1) polyisocyanurate
聚异氰脲酸酯
1.
Study on polyurethance-modified polyisocyanurate acoustic material;
聚氨酯改性聚异氰脲酸酯声学材料的研究
2.
The reaction kinetics of polyurethane formation and that of trimerization of isocyanate in a system of(polyisocyanurate) modified by urethane were studied by FTIR.
采用傅里叶快速红外光谱技术研究了氨酯改性聚异氰脲酸酯反应体系中氨酯、聚异氰脲酸酯生成的反应动力学,结果表明,在该反应体系中,氨酯反应和异氰酸酯的三聚反应是同步发生并同步进行的,其中三聚反应是一级反应;氨酯对异氰酸酯是一级反应,对聚醚二元醇为0级反应。
3.
A premixed polyol and the modified polyisocyanurate foam for sandwich panel using as building materials were prepared from polyether polyol, polyester polyol , PAPI, compound catalysts and blowing agent HCFC-141b.
以聚醚多元醇、聚酯多元醇、聚异氰酸酯PAPI、泡沫稳定剂、复合催化剂、发泡剂HCFC - 14 1b、复合阻燃剂等为原料 ,制备了用于建筑彩钢复合板的组合聚醚及改性聚异氰脲酸酯(PIR)泡沫。
2) polyisocyanurate foam
聚异氰脲酸酯
1.
Based on this curve the trimer content in polyisocyanurate foam can be determined,simply depending on a FTIR-ATR spectrum.
利用凝胶渗透色谱(GPC)测定标准样品的异氰脲酸酯三聚体含量,结合衰减全反射傅里叶红外光谱仪(FTIR-ATR)谱图中三聚体吸收峰的强度得到外标工作曲线,由此建立了FTIR-ATR技术测定聚异氰脲酸酯泡沫中异氰脲酸酯三聚体含量的方法。
2.
Based on this curve the isocyanurate content in polyisocyanurate foam could be calculated, simply depending on a FTIR-ATR spectrum.
利用GPC测定标准样品的异氰脲酸酯含量,结合ATR谱图中异氰脲酸酯吸收峰的强度得到外标工作曲线,以此为基础利用FTIR-ATR技术测定聚异氰脲酸酯泡沫中异氰脲酸酯三聚体含量。
3) polyurethane-isocyurnate
聚氨酯-异氰脲酸酯
1.
The polyurethane-isocyurnate(PUI) material reinforced by nano-CaCO_3 was prepared by situ polymerization on the basis of studying PUI fundamental formula and investigating dispersing methods of nano-CaCO_3 in PUI,and its properties were also studied.
通过纳米碳酸钙(nano-CaCO3)分散方法及其聚氨酯-异氰脲酸酯(PUI)基础配方的研究,采用原位聚合方法研制了nano-CaCO3增强PUI材料,并对其性能进行了研究,结果表明,以n(NCO)/n(OH)配比为10∶1,催化剂为DMP-30、其用量为2%(质量分数,下同)的PUI配方为基础,利用超声辐照技术将nano-CaCO3分散于液化MDI中原位聚合所制的材料,不仅拉伸强度和撕裂强度得到显著提高,而且热稳定性也得到明显提高,当nano-CaCO3质量分数为8%时,材料的综合性能最优。
2.
The polyurethane-isocyurnate (PUI)/ nano-CaCO_3 elastomer was prepared by situ polymerization and its composition and properties were also studied.
采用原位聚合方法合成了聚氨酯-异氰脲酸酯(PUI)/nano-CaCO3弹性体材料,并对其组成及性能进行了研究。
4) polyisocyanurate
聚异氰脲酯
5) isocyanurate
异氰脲酸酯
1.
RIM Synthesis of PU Elastomers Modified by Isocyanurate;
聚异氰脲酸酯改性聚氨酯弹性体的RIM合成研究
2.
Reaction Injection Molding(RIM) of Polyisocyanurate Modified by Urethane──the Effect of Polyether Polyols on the Prepared Product Properties;
氨酯改性聚异氰脲酸酯反应注射成型(RIM)──聚醚醇结构对所制材料性能的影响
6) Polyiso yanurate-oxazolidone
聚(异氰脲酸酯-噁唑烷酮)
补充资料：二氯异氰脲酸钠
分子式：C3Cl2N3O3·Na
分子量：219.95
CAS号：
性质：外 观：白色结晶状粉末，或白色颗粒和片。 用 途：水质处理：饮用水，游泳池用水，工业循环水。杀菌消毒：家庭、医院、公共场所、食品加工、制 药行业，养殖业。高效漂白：有机合成工业，纺织工业。其它：羊毛防缩，纸张防蛀。
制备方法：暂无
用途：暂无
分子量：219.95
CAS号：
性质：外 观：白色结晶状粉末，或白色颗粒和片。 用 途：水质处理：饮用水，游泳池用水，工业循环水。杀菌消毒：家庭、医院、公共场所、食品加工、制 药行业，养殖业。高效漂白：有机合成工业，纺织工业。其它：羊毛防缩，纸张防蛀。
制备方法：暂无
用途：暂无
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条