|
说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
|
|
1) the comparation of the merits and shortcomings
优缺点比较
2) Comparison of merit and fault
优缺点对比
3) Comparative Advantage
比较优势
1.
The Industry Collects Group,Comparative Advantage and China's Ceramic Industry's Competitiveness;
产业集群、比较优势与中国陶瓷产业竞争力
2.
Analyse comparative advantage of Heilongjiang province dairy products;
浅谈黑龙江省乳产品的比较优势
3.
Mode selection of private corporation overseas listing based on comparative advantage;
基于比较优势学说研究民营企业海外上市模式
4) comparative advantages
比较优势
1.
An analysis of comparative advantages: a new idea on the development of tourist industry of Dalian;
比较优势分析:大连旅游业发展的新思路
2.
Exploring and analysis on the thinking of comparative advantages strategy for Shaanxi province;
开拓陕西农业比较优势的发展思路探析
3.
On the comparative advantages of Xi′an in attracting foreign investment——A postive analysis against the background of China′s joining WTO and the Western Development;
论西安市利用外资的比较优势——以中国加入WTO和西部大开发为背景的实证分析
5) comparative superiority
比较优势
1.
Bringing Comparative Superiority into Play to Promote Advance in Phosphate Chemical Industry;
发挥比较优势 促进磷化工发展
2.
Getting rid of the natural resource comparative superiority pitfall of the economy development in the west of China;
破除西部经济发展中的自然资源比较优势“陷阱”
3.
Bringing the Comparative Superiority into Play,Prompting the Development of Economy in Heilongjing Province;
发挥比较优势 促进黑龙江经济的发展
6) relative advantage
比较优势
1.
Through analysis, this paper puts forward two key points to enhance Chinese produce relative advantage: (1) basic strategy, including adjustment and optimization of planting industry structure and distribution, quick development of farming, aquaculture and products processing as well as sound produce import and export system; (2) financial strategy, e.
在分析了我国农产品比较优势的特征基础上,提出了提升我国农产品比较优势的基本策略和财政政策。
2.
The relative advantage of industry is to a great degree an internal de terministic factor in competitive advantage.
产业的比较优势在很大程度上是竞争优势的内在决定因素。
3.
The benefit from the relation of area economic development and its relative advantage is very important.
区域经济的发展与比较优势的发挥关系很重要。
补充资料:几种常见快速成型工艺优缺点比较
FDM 丝状材料选择性熔覆(Fused Deposition Modeling)快速原型工艺是一种不依靠激光作为成型能源、而将各种丝材加热溶化的成型方法,简称FDM。 丝状材料选择性熔覆的原理室,加热喷头在计算机的控制下,根据产品零件的截面轮廓信息,作X-Y平面运动。热塑性丝状材料(如直径为1.78mm的塑料丝)由供丝机构送至喷头,并在喷头中加热和溶化成半液态,然后被挤压出来,有选择性的涂覆在工作台上,快速冷却后形成一层大约0.127mm厚的薄片轮廓。一层截面成型完成后工作台下降一定高度,再进行下一层的熔覆,好像一层层"画出"截面轮廓,如此循环,最终形成三维产品零件。 这种工艺方法同样有多种材料选用,如ABS塑料、浇铸用蜡、人造橡胶等。这种工艺干净,易于操作,不产生垃圾,小型系统可用于办公环境,没有产生毒气和化学污染的危险。但仍需对整个截面进行扫描涂覆,成型时间长。适合于产品设计的概念建模以及产品的形状及功能测试。由于甲基丙烯酸ABS(MABS)材料具有较好的化学稳定性,可采用加码射线消毒,特别适用于医用。但成型精度相对较低,不适合于制作结构过分复杂的零件。 FDM快速原型技术的优点是: 1、 制造系统可用于办公环境,没有毒气或化学物质的危险。 2、 工艺干净、简单、易于材作且不产生垃圾。 3、 可快速构建瓶状或中空零件。 4、 原材料以卷轴丝的形式提供,易于搬运和快速更换。 5、 原材料费用低,一般零件均低于20美元。 6、 可选用多种材料,如可染色的ABS和医用ABS、浇铸用蜡和人造橡胶。 FDM快速原型技术的缺点是: 1、 精度较低,难以构建结构复杂的零件。 2、 垂直方向强度小。 3、 速度较慢,不适合构建大型零件。 SLA 敏树脂选择性固化是采用立体雕刻(Stereolithography)原理的一种工艺,简称SLA,也是最早出现的、技术最成熟和应用最广泛的快速原型技术。 在树脂液槽中盛满液态光敏树脂,它在紫外激光束的照射下会快速固化。成型过程开始时,可升降的工作台处于液面下一个截面层厚的高度,聚焦后的激光束,在计算机的控制下,按照截面轮廓的要求,沿液面进行扫描,使被扫描区域的树脂固化,从而得到该截面轮廓的塑料薄片。然后,工作台下降一层薄片的高度,以固化的塑料薄片就被一层新的液态树脂所覆盖,以便进行第二层激光扫描固化,新固化的一层牢固的粘结在前一层上,如此重复不已,知道整个产品成型完毕。最后升降台升出液体树脂表面,即可取出工件,进行清洗和表面光洁处理。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条
|