1) slab size design
坯料尺寸设计
2) blank size
坯料尺寸
1.
By studying the present calculating formula of rectangular drawpiece blank size, this paper gains the major reason of inducting error,and obtains new more accurate formula,according to the same principal that surface area is equal before and after drawing.
对现有盒形拉深件坯料尺寸计算公式进行了分析 ,得出其误差存在的原因 ,并根据“坯料面积与拉深件面积相等”的原则得出了较为准确的盒形拉深件坯料尺寸计算新公式。
2.
An analysis is made of the effects of blank size of convex head for pressure containers on its forming quality.
分析了压力容器凸形封头坯料尺寸对其成形质量的影响 ,阐述了要保证其良好成形 ,合适的坯料尺寸是一个重要的因素。
3.
The best combination of blank-hold force and blank size is obtained by uniform design method.
采用均匀设计法,选择出了预成形最佳压边力与坯料尺寸的组合。
3) billet size
坯料尺寸
1.
Effect of billet size on material deformation during equal channel angular pressing;
坯料尺寸对等径角挤压材料变形的影响
2.
Based on the results of experiment with polyrabonate, the optimum billet size and reasonable process parameters for practical manufacture are dis.
本文利用光塑性方法，以聚碳酸酯（Ｐｏｌｙｃａｒｂｏｎａｔｅ）为材料研究了矩形花键轴冷挤压成形过程，获得了花键挤压成形的三维塑性应变场分布，提出其变形的应变分布特征，并对典型截面的应变进行了计算分析；文中还通过对聚碳酸酯材料的实验，得到了使花键齿形充满的最佳坯料尺寸，为实际工艺生产优选出合理的工艺参数。
4) large-size billet
大尺寸坯料
5) dimension design
尺寸设计
1.
In the dimension design of coal pillars in strip mining,presently,most of them are carried out by analyzing strength stability,without considering the effect of weak plane in coal pillar.
针对在条带开采煤柱尺寸设计中大多数是采用强度稳定性分析的方法,而没有考虑弱面对煤柱稳定性的影响,由于弱面的存在,煤柱常常会因抗剪强度不够而产生剪切破坏等问题。
2.
on the basis of Lest squres solution,its dimension design linear equations were set up.
提出了一种钳口作平动的钳子 ,基于最小二乘法建立了该种钳子尺寸设计的线性方程组 ,通过三维动画与试制验证了设计的正确
3.
on the dimension design of coal pillars in strip mining, presently, most of them are carried out by analyzing strength stability, without considering the effect of weak plane in coal pillar, in fact ,coal pillars with weak plane are often damaged, because the shear strength is not enough.
在条带开采煤柱尺寸设计中,目前大多数是采用强度稳定性分析的方法,而没有考虑弱面对煤柱稳定性的影响。
6) size design
尺寸设计
1.
The Sensitivity Analysis of Coupled Acoustics-structure System Based on Size Design Variable;
基于尺寸设计变量的声场-结构耦合系统的敏度分析
2.
Material selection,export structure design,and box size design are the key issues and difficulties of Fenzhouxiang millet packaging.
材料选择、倒出口结构设计、盒型尺寸设计是汾州香小米包装的重点与难点。
补充资料：工程图标准尺寸及坐标尺寸
标准标注类型，是我们常用的标注类型。而坐标标注是便于数控加工采用的另一中标注形式。PRO/E可以将两种标注方式进行转换。
· 3.2 标准标注到坐标标注的转换
注意： 转化为坐标标注的尺寸必须是线性标注的，下列尺寸不能转化为坐标标注：
- 被显示成线性尺寸的直径
- 中心线尺寸
- 选择MODIFY DRAW > Dim Params > Dim Type > Ordinate Dim > Create Base.
- 选择作为参考基准线的尺寸
- 选择基准的引出线，该点为0点
- 选择 MOD DIM TYPE > Lin to Ord .
- 选择线性尺寸：注意：必须选择具有相同基准的尺寸
========>>>>
1. 选择 DIM PARAMS > Diam Dim Type .
2.点击Ord to Lin 
3.选择尺寸即可
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条