1) fuzzy design
模糊设计
1.
Method of fuzzy design and assessment for reliability of hydraulic system;
液压系统可靠性模糊设计与评价方法
2.
Study of fuzzy design system of shaft roughness;
轴类零件粗糙度参数模糊设计系统研究
3.
In this paper,based on the thinking of fuzzy design and concurrent engineering,a model of the concurrent design system for die casting process is set up,and fuzzy algorithms included in the blocks of the system are described.
基于模糊设计和并行工程思想，建立了压铸工艺设计系统的并行模型，描述了系统各模块所蕴含的模糊设计算法，为压铸工艺ＣＡＤ的实现奠定了基础。
2) Fuzzy optimal design
模糊优化设计
1.
The fuzzy optimal design for the structure parameter of pull type diaphragm spring;
拉式膜片弹簧结构参数的模糊优化设计
2.
Fuzzy optimal design of constructional parameters of unidirectional wedge-typed overrunning clutch;
楔块式单向超越离合器结构参数的模糊优化设计
3.
Based on the fuzzy mathematics theory, the math model of the fuzzy optimal design for the gear reducer is set up and a computer optimal interface that gear optimal design plan is developed.
基于Pro/E的支撑平台,以Pro/TOOLKIT和MFC类库作为核心技术,提出了基于模糊优化设计理论的计算机辅助齿轮设计方案,结合模糊数学的基本原理,建立了齿轮传动模糊优化设计的数学模型,开发出一套计算机辅助齿轮优化设计的系统软件,分别给出了普通优化设计和模糊优化设计的计算结果,体现了模糊优化设计的优越性。
3) fuzzy optimization design
模糊优化设计
1.
The introduction of the vertical beam structure design and fuzzy optimization design is given as well.
研究了现用抽芯设备的优缺点,论述了抽芯工作台的结构与工作原理,介绍了纵梁的结构设计和模糊优化设计,结果表明,通过模糊优化设计可使纵梁的质量大为减轻。
2.
By using ZW-100 water-jet loom as an example, the work principle of pump piston for water-jet looms is introduced and the design of the pump piston is carried out by the common optimization design method and fuzzy optimization design method.
以日本津田驹ZW-100喷水织机为例,在介绍喷水织机的工作原理的基础上,对喷水织机的水泵柱塞进行了普通优化设计和模糊优化设计。
3.
By use of double objective optimization method, that is, for maximal accelerate of sley sword minimizing and coefficient of speed rate of sley sword traveling maximizing, mathematics model of the fuzzy optimization design of the four-link weft beat-up mechanism is set up.
设计更好地符合客观实际的四连杆打纬机构,在充分考虑各设计参数的模糊性的基础上,根据模糊方法学的基本理论提出一种模糊优化设计方法,采用使筘座的最大加速度最小,同时使筘座的行程速比系数最大的多目标优化方法,建立了该问题的模糊优化设计的数学模型,并对实例进行了计算与分析,获得最优的综合性能。
4) fuzzy reliability design
模糊可靠性设计
1.
In this paper the shortage of general machine tool spindle design is analysed and the fuzzy reliability design is brought apply forward for rigidity check of machine tool spindle.
讲述了常规机床主轴设计的不足 ,提出将模糊可靠性设计运用于主轴的刚度校核中 ,通过例子阐述主轴模糊可靠性设计过程和结果 ,以及与常规可靠性设计的不同 ,说明主轴采用模糊可靠性设计的必要
2.
Deep discussion has been carried through in this paper on the fuzzy reliability design of elliptical bearing,the modeling of fuzzy reliability design was carried out on the elliptical bearing by utilizing the data of conventional reliability design,the allowable reliability designing index was obtained by means of a secondary fuzzy synt.
文中对椭圆轴承的模糊可靠性设计进行了深入探讨,利用常规可靠性设计数据对椭圆轴承进行模糊可靠性设计建模,通过二级模糊综合评判获得许用可靠性设计指标,最后依靠M atlab软件编程求解。
3.
Introduce mechanic detail rigidity fuzzy reliability design and deformation distribution parameter together with rigidity function determination.
介绍了机械零件刚度模糊可靠性设计变形分布参数和刚度隶属函数的确定 ,导出了零件刚度模糊可靠度的计算公式 ,并通过机床主轴模糊可靠性设计实例说明机械零件模糊可靠性的计算方
5) Fuzzy Optimization
模糊优化设计
1.
Fuzzy Optimization for the Spindle of Machine Tool;
机床主轴的机械结构模糊优化设计
2.
The model of fuzzy optimization was established and its solution procedure was detailed.
将模糊优化设计方法应用于电动装置的蜗杆传动设计,建立了模糊优化数学模型,并对其求解方法进行了详细的说 明,通过实例表明模糊优化设计可以使蜗杆传动更加符合客观实际,从而进一步减小电动装置的体积,提高电动装置的 效率。
6) fuzzy optimum design
模糊优化设计
1.
Fuzzy optimum design of a motor-mechanism system with links fabricated from three-dimensional braided composite materials;
电动机用复合材料连杆机构系统的模糊优化设计
2.
With the pursuit of minimal volume,a mathematical model about fuzzy optimum design of rotary shearing mechanism of pneumatic roofbolter with vane motor is set up after considering the fuzziness of restraint conditions.
考虑约束条件的模糊性,以体积最小为目标,建立叶片式风动锚杆钻机旋转切削机构的模糊优化设计数学模型。
3.
This paper introduced the fuzzy optimum design process of the twin_universal coupling,that is the key mobile part of the four_spiral cover vacuum bottle seamer;and inquired into the methods and ways about the fuzzy optimum design.
本文详细介绍了四旋盖真空封瓶机中关键运动件———双万向联轴器的模糊优化设计过程，并探讨了有关模糊优化设计的方法和途
补充资料：模糊正交设计
分子式：
CAS号：
性质： 用常规的正交设计表安排实验，用模糊数学理论和方法处理数据的一种试验设计方法。与常规的正交设计方法相比，能在同样实验工作量的条件下能获得更多的信息。
CAS号：
性质： 用常规的正交设计表安排实验，用模糊数学理论和方法处理数据的一种试验设计方法。与常规的正交设计方法相比，能在同样实验工作量的条件下能获得更多的信息。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条