1) oil length
油度
1.
The water dispersive alkyd resins with different oil lengths were obtained using different fatty oils,and the proper kind of fatty oil and the proper oil length were determined by testing the properties of film.
使用不同的脂肪油合成了不同油度的水分散性醇酸树脂,通过涂膜性能测试确定了最佳的脂肪油种类和最佳的油度值。
3) lubricant film thickness
油膜厚度
1.
This paper had got overall introduction on many measurement technologies and detecting methods of lubricant film thickness, and on their disadvantages and application status in that of thrust bearing.
较为全面、系统地介绍了润滑油膜的测量技术和各种检测方法的特点与不足,以及在推力轴承检测中的应用情况,这对于更好地进行推力轴承油膜厚度的检测有一定的参考价值。
4) lipophilic degree
亲油化度
1.
The prepared samples are investigated by the lipophilic degree test,FTIR and TEM.
采用亲油化度实验、红外光谱、透射电镜等手段表征了纳米二氧化钛的改性效果和结构。
2.
The results showed that stearic acid was the best modifying agent and optimal condition was 10% dosage,pH 7 and 2 h,its lipophilic degree was up to 89.
实验结果表明,以硬脂酸为改性剂、用量为15%、pH值为8、改性时间为2 h时,改性后的纳米Fe2O3的亲油化度达到89。
3.
Using sodium laurate as modifying agent in the optimal condition ,the lipophilic degree of modified nanometer ZnO is 79.
5h时 ,改性后的纳米ZnO的亲油化度达到 79。
5) oil column height
油柱高度
1.
On the basis of studying basic characteristics of storage layer in meshwork-carpet type hydrocarbon reservoir system,the critical oil column height of oil migration in storage layer is calculated by using theory of secondary hydrocarbon migration and analyzing migration driving force and resistance force.
在研究网毯式油气成藏体系仓储层基本特征的基础上,以油气二次运移理论为基础,通过对仓储层中油的运移动力和运移阻力分析,计算仓储层油运移的临界油柱高度,来研究仓储层运移或聚集油的砂体厚度,判断仓储层内油的运聚状态,结果表明:(1)当仓储层的砂体厚度大于临界油柱高度时,仓储层可以起到输导油的作用,当仓储层的砂体厚度小于临界油柱高度时,仓储层不能运移油,起聚集油的作用;(2)临界油柱高度的值不是绝对的,它受孔隙度、埋深等因素的影响,三者之间有相互补偿的关系,临界油柱高度与孔隙度呈负相关关系,与埋深呈正相关关系。
6) oil film thickness
油膜厚度
1.
The influence of oil film thickness variation on workpiece gauge control in rolling process is analyzed.
分析了轧制过程油膜厚度变化对钢板厚度控制精度的影响,基于油膜厚度Reynolds计算公式,借鉴轧辊调零计算轧机弹跳的想法,提出相对油膜厚度的计算方法,并在轧机上进行数据采集,得到油膜变化的实测值,通过弹跳曲线的平移处理,得到最终的油膜变化曲线,根据该曲线可很方便地确定模型的结构并拟合出模型系数。
2.
In order to analyze the influence of oil film thickness of back-up roll dynamic oil film bearing in tandem cold rolling on strip thickness and to improve the AGC accuracy,oil film thickness experiment was done.
为了分析冷连轧机支撑辊动压油膜轴承的油膜厚度变化对带钢厚度的影响,提高轧机AGC精度,进行了油膜厚度测试实验。
3.
The hydrostatic slide’s principle,characteristic,classification,applicable situation were introduced,and the effect factors for slide design ,including load capacity,oil film rigidity,oil film thickness as well as slide clearance were analyzed.
介绍了液体静压导轨工作原理、特点、分类及适用场合 ,分析了承载能力、油膜刚度、油膜厚度以及导轨间隙等静压导轨设计的影响因素。
补充资料：油度
分子式：
CAS号：
性质：指油漆中油与树脂的比例。对于油性树脂漆来说，油度以每1重量份硬树脂中所含油的重量份数来表示，但美国以100磅硬树脂中所含油的加仑数来表示。对于醇酸树脂来说，油度以树脂固体中所含油的重量百分数来表示，即油度(%)=油用量/树脂理论产量×100%。
CAS号：
性质：指油漆中油与树脂的比例。对于油性树脂漆来说，油度以每1重量份硬树脂中所含油的重量份数来表示，但美国以100磅硬树脂中所含油的加仑数来表示。对于醇酸树脂来说，油度以树脂固体中所含油的重量百分数来表示，即油度(%)=油用量/树脂理论产量×100%。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条