说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 离子扩散系数
1)  ion diffusion coefficient
离子扩散系数
1.
The convenient apparatus was devised for testing the ion diffusion coefficient of hydrogel membranes.
研究结果表明,离子在致密高分子膜中的渗透过程符合溶解-扩散机理,随着NVP含量的增加,材料的离子扩散系数P增大,渗透率与高分子的链段活动性和自由体积有关,共聚物水凝胶中钾、钠离子的扩散系数P与聚合物的水化度H之间可以用“自由体积”理论描述。
2)  chloride ion diffusion coefficient
氯离子扩散系数
1.
Rapid testing method for chloride ion diffusion coefficient of marine concrete saturated with seawater based on electrical resistivity measurement (Ⅱ):Experimental research;
基于饱海水电阻率的海工混凝土氯离子扩散系数测试方法试验研究
2.
Experimental research on marine concrete chloride ion diffusion coefficient;
海工混凝土氯离子扩散系数的试验研究
3.
The mixture ratio of C40 marine high performance concrete is optimized through test of the hydration heat of binding material,slump,chloride ion diffusion coefficient,anti-crack rand of concrete.
通过测试胶凝材料水化热、混凝土的坍落度和氯离子扩散系数、抗裂等级等性能,对C40海工混凝土的配合比进行了优化设计。
3)  chloride diffusion coefficient
氯离子扩散系数
1.
A finite element method for predicting the chloride diffusion coefficient of cement paste;
水泥石氯离子扩散系数预测的有限元方法
2.
Researching the relationship of concrete s electric flux and chloride diffusion coefficient;
混凝土电通量与氯离子扩散系数关系研究
3.
Research on the issues about rapid chloride permeability test results and chloride diffusion coefficient of concrete;
混凝土电通量和氯离子扩散系数的若干问题研究
4)  Chloride diffusivity
氯离子扩散系数
1.
It is very crucial to the durability design and assessment of reinforcedconcrete structures located in a marine or de-icing salt environment todetermine the chloride diffusivity of concrete and the time to surfacecracking.
确定混凝土氯离子扩散系数和表面开裂时间对海洋和除冰盐环境中钢筋混凝土结构耐久性设计和评估非常关键。
2.
Based on the experimental results, it is shown that dry-wet cycling has a negligible influence on the chloride diffusivity of concrete and that the chloride concentration in dry-wet cycling is always larger than that in natural cycling.
试验结果表明,干湿循环对混凝土氯离子扩散系数几乎没有影响,加速循环下的氯离子浓度高于自然循环下的氯离子浓度。
3.
Therefore, it is necessary to determine the chloride diffusivity of concrete by experiments and theoretical methods.
混凝土氯离子扩散系数是混凝土耐久性设计和评估的重要依据之一,因此,有必要通过实验和理论方法确定混凝土氯离子扩散系数
5)  Li-ion diffusion coefficient
锂离子扩散系数
1.
The paper reviewed the fundamental theory of EIS and summarized the design of equivalent circuit,the calculation of Li-ion diffusion coefficient and the application of EIS on the research of LiFePO4.
综述了等效电路设计、锂离子扩散系数理论计算和EIS在LiFePO4研究中的具体应用。
2.
Li-ion diffusion coefficient can be effectively obtained from coulometric titration and electrochemical impendance method.
库仑法和电化学阻抗法是测量锂离子扩散系数有效的测量手段。
6)  lithium diffusion coefficient
Li离子扩散系数
补充资料:分子扩散系数
      表征物质分子扩散能力的物理量,受系统的温度、压力和混合物中组分浓度的影响。根据斐克定律,组分A在组分B中的分子扩散系数,其值等于该物质在单位时间内、单位浓度梯度作用下、经单位面积沿扩散方向传递的物质量。
  
  组分在气体中分子扩散系数约10-5~10-4m2/s,在液体中约为10-9~10-10 m2/s,在固体中约为10-9~10-14 m2/s。分子扩散系数的准确数值是通过实验测定的。气体和液体中的分子扩散系数,也用一些半经验公式估算。
  
  气体中的分子扩散系数  对于压力不太高的双组分气体混合物,将分子结构和运动作适当简化后,用气体分子运动论能够导出计算分子扩散系数的理论式,再根据实验结果作适当修正得出半经验的计算式。例如:
  
   式中DAB为组分A在组分B中的分子扩散系数;MA和MB分别为组分A和B的分子量;p为总压力;T为绝对温度;(∑V)A、(∑V)B分别为组分A和B的分子体积。此式的计算值与实测值的平均偏差为4%~7%,对含强极性分子的系统尤欠准确。
  
  液体中的分子扩散系数  曾有人对于稀溶液中溶质的分子扩散作过一些理论分析,导出了如下的关系式:
  
  
  
    式中μB为溶剂粘度;F(V)为与混合物分子体积有关的函数。在这个基础上提出的半经验式,可用以计算非电解质组分A在其稀溶液中的分子扩散系数。例如:
  
    式中VA为组分A在正常沸点下的摩尔体积;φB为溶剂的缔合因子,对于水其推荐值为2.6,甲醇为1.9,乙醇为1.5,苯、醚、庚烷等非缔合溶剂为 1.0。此式计算值与实测偏差在13%以内。液体中的分子扩散系数与溶液的浓度密切相关。
  
  固体中的分子扩散系数  若固体内部存在某一组分的浓度梯度, 也会发生扩散, 例如氢气透过橡皮的扩散,锌与铜形成固体溶液时在铜中的扩散,以及粮食内水分的扩散等。物质在固体中的扩散系数随物质的浓度而异,且在不同方向上其数值可能有所不同,目前还不能进行计算。各种物质在固体中的扩散系数差别可以很大,如氢在25℃时在硫化橡胶中为0.85×10-9m2/s,氦在20℃时在铁中为2.6×10-13m2/s。
  

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条