1) hollow cathode effect
空心阴极效应
1.
TiN permeation layers composed of diffusion and deposition layers are synthesized on the surface of carbon steel using plasma point discharge, hollow cathode effect and reactive vapor deposition techniques.
利用等离子尖端放电、空心阴极效应和反应气相沉积技术,在碳钢表面形成具有扩散层和沉积层的Ti N渗镀层,然后在此渗镀层表面沉积(PVD法)TiB2薄膜,形成Ti N/TiB2复合渗镀层。
2.
A new technique of TiN multi-permeation layers composed of diffusion and deposition layers on the surface of carbon steel by using plasma point discharge, hollow cathode effect and reactive vapor deposition at the same time are introduced.
介绍了一种同时利用等离子尖端放电、空心阴极效应和反应气相沉积技术,在碳钢表面形成具有扩散层和沉积层的TiN复合渗镀层新工艺技术。
2) hollow-cathode effect
空心阴极效应
1.
Using of glow discharge plasma and a hollow-cathode effect,TiN/Ti multi-permeations alloying coatings were formed on the mild steel and were examined by LEC figure analysis,M-400-H1 diamond pyramid hard- ness anaysis,GDA750 glow discharge optical spectrum analysis and WS-97 scratch test.
利用双层辉光离子渗金属技术和空心阴极效应,在低碳钢表面形成 TiN/Ti 复合渗镀层。
3) hollow cathode discharge
空心阴极效应
1.
The power has been used to conduct two sorts of experiments including both to restrain arc discharge and to control hollow cathode discharge.
在等离子体负载下进行了抑制弧光放电和空心阴极效应的实验,结果表明:交流脉冲放电对弧光放电和空心阴极效应的抑制是非常有效的。
2.
An AC middle frequency pulsed plasma power supply is used to conduct three sorts of experiments including to restrain arc discharge, to control hollow cathode discharge and ion nitriding on high-chrome steel material surface.
采用中频交流脉冲等离子体源进行了抑制弧光放电和空心阴极效应以及离子渗氮工艺的实验。
4) hollow cathode
空心阴极
1.
Structure and mechanical properties of α-CN_x:H films synthesized by hollow cathode;
空心阴极制备a-CN_x:H薄膜的结构及力学性能研究
2.
Research on hollow cathode discharge plasma sintering techniques of aluminium nitride;
AlN陶瓷的空心阴极等离子烧结工艺研究
3.
Numerical-simulation of dynamic process in TC4 weld pool during hollow cathode arc welding in vacuum;
TC4合金空心阴极真空焊接熔池动态行为的数值模拟
5) hollow cathod
空心阴极
1.
Plasma nitriding of 40Cr steel assisted by hollow cathode;
40Cr钢空心阴极辅助离子渗氮
2.
In this paper, the self-maintaining arc in vacuum with hollow cathod and its application for welding and brazing were studied.
主要研究真空条件下的自持放电电弧（空心阴极真空电弧）作为新型热源用于熔化焊及钎焊的工艺适应性。
3.
For overcoming some shortcomings in usual sintering process of powder metallurgy goods, the hollow cathode plasma sintering process is studied.
为了克服常现粉末冶金制品烧结工艺的缺点，试验研究了空心阴极等离子烧结工艺。
6) hollow-cathode
空心阴极
1.
The discharge properties in a hollow-cathode tube filled with gas are measured and the wavelength for Helium discharge is obtained.
作者对空心阴极放电管中充入不同载气的放电性能进行了实验测试,得到空心阴极放电的部分特性。
补充资料：多元素空心阴极灯
分子式：
CAS号：
性质：在同一支灯中用几种金属制成阴极，同时发射几种元素特征谱线的锐线光源。可用合金、金属间化合物或将多种金属粉末按一定比例混合，并压制和烧结，作成阴极。最多可达7种元素，如Al，Ca，Cu，Fe，Mg，Si，Zn灯。避免每测一种元素换一个灯，但发射强度低于单元素灯。如果几种金属组合不当，将产生光谱干扰。
CAS号：
性质：在同一支灯中用几种金属制成阴极，同时发射几种元素特征谱线的锐线光源。可用合金、金属间化合物或将多种金属粉末按一定比例混合，并压制和烧结，作成阴极。最多可达7种元素，如Al，Ca，Cu，Fe，Mg，Si，Zn灯。避免每测一种元素换一个灯，但发射强度低于单元素灯。如果几种金属组合不当，将产生光谱干扰。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条