说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 编码点
1)  coded point
编码点
1.
A point matching method with coded points and epipolar constrain is des cribed.
提出一种利用编码和极线约束相结合实现点匹配的方法,该方法利用圆环式编码点作为识别码标识区域。
2.
By employing the matching technology based on combining coded points and non-coded point,we discuss the method of sub pixel reference point center location and identification of two kinds of targets point.
采用编码点和非编码点相结合的方法实现摄影测量中对应点匹配技术,讨论了标记点的中心亚像素定位方法、两类标记点的识别及编码标记点的解码方法。
3.
The high accuracy center measuring method of marked points technique based on the fitting sub-pixel edge, and the methods of coded points designing and coded points auto-detecting were investigated.
在国内率先开发了近景工业摄影测量系统XJTUDP,介绍了系统的组成、开发内容,研究了基于亚像素边缘拟合的高精度标志点中心检测方法、编码点设计及编码点自动检测方法。
2)  real coded
浮点编码
1.
Optimization of nonline simulated moving bed chromatography with real coded genetic algorithms;
非线性模拟移动床色谱的浮点编码遗传算法优化策略
2.
An effective strategy based on real coded genetic algorithms was developed to optimize the operating conditions of simulated moving bed chromatography.
开发了一种基于浮点编码遗传算法的模拟移动床色谱优化方法。
3)  braille code
点字编码
1.
A method of processing braille in computer is presented with the braille scheme, the braille code scheme, the formation of braille code in computer and the input method of braille.
介绍了计算机处理盲文的方法 ,包括汉语点字方案、点字编码方案、点字机内码的形成及点字的计算机输入方
4)  encoding loci
编码位点
1.
LMW-GS included B type of LMW-GS,C type of LMW-GS and D type of LMW-GS whose encoding loci are Glu-3,Gli-land Gli-2 and Glu-2 respectively.
编码位点分别为 Glu- 3位点、Gli- 1位点、Gli- 2位点和 Glu- 2位点。
5)  node coding
节点编码
1.
Research on Node Coding and Routing Algorithm for Network-on-Chip;
NoC中网络节点编码及路由算法的研究
2.
This paper analyses ex- isting three network topology architectures and presents a novel coding method for NoC nodes,which fits Torus topology architecture well since the node coding implies the relations of neighbouring nodes and their links.
在比较现有的三种网络拓扑结构的基础上,提出了一种隐含着相邻节点以及节点之间链路关系并适合二维Torus拓扑结构的节点编码方法。
6)  vertex encoding
顶点编码
1.
A new concept of the window s vertex encoding is proposed for the first time based on the essential characteristic of the line clipping against polygonal window.
从多边形窗口线裁剪的本质特征出发 ,首次提出窗口顶点编码的新概念 。
补充资料:闭式单点、双点压力机
代码:00413
设备名称:闭式单点、双点压力机
型号规格:公称力≥800kN
计量单位:台
主要参数内容
国际先进国内先进国内一般国内落后评定方法及说明
(一)加工精度
    参照GB10924-89、GB10933-89、JB5200-91
1、滑块下平面对工作台上平面的平行度(mm)
30%精度储备20%精度储备达到规定值大于规定值 
0.02+0.10/100×滑块下平面的被测长度
     
2、滑块行程对工作台上平面的垂直度
30%精度储备20%精度储备达到规定值大于规定值 
0.05+0.02/100×滑块行程长度
     
(二)结构性能
     
1、离合器、制动器接通率,当滑块行程次数≤16次/分时为70%,≤25次/分时为60%,≤45次/分时为50%
大于规定值10%大于规定值达到规定值达不到规定值 
2、液压超负荷保险装置、微调装置、吨位指示器
全部具有全部具有部分具有没有 
(三)噪声dB(A)
     
1、公称力≤400kN
≤85≤87≤88>88 
2、公称力>400kN
≤87≤88≤90>90 
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条