说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 高硼合金钢
1)  high boron alloy steel
高硼合金钢
1.
The influence of rare earth, titanium and nitrogen on the structures and properties of high boron alloy steel was researched.
研究了稀土-钛-氮复合变质处理对高硼合金钢组织和性能的影响。
2)  B microallyed steel
含硼微合金钢
3)  B-Ti microalloyed structural steel
硼钛微合金化钢
4)  High alloy steels
高合金钢
5)  high alloy steel
高合金钢
1.
photoelectric spectroanalysis for multielement determination of high alloy steel;
高合金钢中的多元素光电光谱测定
2.
Although root over-burn of high alloy steel welding lines is not defined as defect by welding regulations,it significantly affects the life of welded pipes.
高合金钢焊缝根部的"过烧"虽然未被相关焊接规程定义为缺陷,但实际上对焊接管道的使用寿命有极大的影响。
3.
It is serious for embrittlement of high alloy steel carbonitriding and it is difficult to eliminate by low temperature tempering,for example,after quenching and 150℃ 3h tempering,the reductions of area of 20Cr2Ni4A and 18CrNiWA steels in carbonitriding are 10% and 6 4% respectively of those heating in air.
研究了碳氮共渗时的氢脆及其消除方法 ,发现高合金钢氢脆敏感性大 ,在一般低温回火中很难消除 ,如淬火后经 15 0℃×3h回火 ,2 0Cr2Ni4A和 18CrNiWA钢的断面收缩率在碳氮共渗时分别为空气加热的 10 %及 6 4%。
6)  high boron iron-based alloy
高硼铁基合金
1.
The as-cast microstructures of high boron iron-based alloy samples solidified in investment mould and metal mould all comprises dendritic matrix and interdendritic eutectic boride Fe2B.
高硼铁基合金在熔模壳型和金属铸型中凝固时,铸态组织部是由树枝状基体和共晶硼化物Fe2B组成。
补充资料:高硼低碳高温合金
分子式:
CAS号:

性质:一种镍基铸造高温合金。硼含量为0.05%~0.2%,碳含量小于0.05%,不同于普通铸造镍基合金的硼为0.005%~0.03%和碳为0.1%~0.25%。高硼低碳高温合金在保持普通镍基铸造高温合金高温强度的同时,中温性能特别是塑性显著提高,如Mar-M200合金在980℃时具有很高的持久强度、蠕变强度和良好的塑性,但760℃的持久塑性几乎为零,而其改型的高硼低碳B-1950合金在保持Mar-M200合金980℃优越性能的同时,760℃的持久塑性可达2%~5%。主要用于制做发动机涡轮叶片和整体铸造涡轮转子。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条