说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 耐介质性能
1)  medium-resistance
耐介质性能
1.
Heat and medium-resistance performance of HNBR;
氢化丁腈橡胶耐热和耐介质性能
2.
With molar ratio of -NCO to HTBN(namely R value), molar ratio of amino-terminated siloxane to HTBN,molar ratio of chain extender to HTBN,and additive wise of amino-terminated siloxane as four main factors,so the influences of various factors were investigated by L9(34) orthogonal experiments on mechanics performance and medium-resistance of HTBN/PU modified by amino-terminated siloxane.
以n(-NCO)∶n(HTBN)、n(硅油)∶n(HTBN)、n(扩链剂)∶n(HTBN)和硅油加入方式为主要影响因素,采用L9(34)正交实验方法研究了各因素对端氨基硅油改性HTBN型PU的力学性能和耐介质性能的影响。
2)  resistance to medium ageing
耐介质老化性能
1.
different carbon black and different plasticizer on properties of resistance to medium ageing and injection technology were stated, its reasonable manufacture technology was determined, too.
阐述了不同橡胶、不同炭黑以及不同增塑剂对耐介质老化性能和注压工艺的影响,确定了合理的生产工艺。
3)  chemical resistance
耐介质性
1.
The influence of amount and feeding method of FBA (fluoro methacrylate), dosage of NMA (N-methyl acrylamide) and amount of emulsifier on chemical resistance of fluoro emulsion coatings film through determination of chemical resistance and contact angle of the film.
通过测试含氟乳胶膜的耐介质性,并运用JC2000A静态接触角测量仪测定乳胶膜的接触角,研究了FBA(甲基丙烯酸含氟酯)用量、FBA加入方式、NMA(N-羟甲基丙烯酰胺)用量、乳化剂用量对含氟乳胶膜耐介质性的影响。
2.
And the effect on the water and chemical resistance with introduction of silicon monomer was also discussed.
研究了接枝温度、引发剂浓度对单体接枝率的影响;亲水单体含量、中和度对接枝共聚物水分散稳定性的影响;考察了功能硅单体(A-1757)的引入对接枝共聚物膜的耐水、耐介质性的影响。
4)  resistance of acidic alkali and salt properties
耐酸碱盐介质腐蚀性能
5)  stability against medium soaking
耐介质稳定性
6)  dielectrics voltage-resistance
介质耐压
1.
The testing of insulation resistance,dielectrics voltage-resistance and contact resistance is essential for the connector to reliably operate.
绝缘电阻、介质耐压和接触电阻检验是保证电连接器正常可靠地工作的最基本的常规检验项目。
补充资料:不锈钢的物理性能、力学性能和耐热性能
不锈钢的物理性能


不锈钢和碳钢的物理性能数据对比,碳钢的密度略高于铁素体和马氏体型不锈钢,而略低于奥氏体型不锈钢;电阻率按碳钢、铁素体型、马氏体型和奥氏体型不锈钢排序递增;线膨胀系数大小的排序也类似,奥氏体型不锈钢最高而碳钢最小;碳钢、铁素体型和马氏体型不锈钢有磁性,奥氏体型不锈钢无磁性,但其冷加工硬化生成成氏体相变时将会产生磁性,可用热处理方法来消除这种马氏体组织而恢复其无磁性。

奥氏体型不锈钢与碳钢相比,具有下列特点:

1)高的电阴率,约为碳钢的5倍。

2)大的线膨胀系数,比碳钢大40%,并随着温度的升高,线膨胀系数的数值也相应地提高。

3)低的热导率,约为碳钢的1/3。

不锈钢的力学性

不论不锈钢板还是耐热钢板,奥氏体型的钢板的综合性能最好,既有足够的强度,又有极好的塑性同时硬度也不高,这也是它们被广泛采用的原因之一。奥氏体型不锈钢同绝大多数的其它金属材料相似,其抗拉强度、屈服强度和硬度,随着温度的降低而提高;塑性则随着温度降低而减小。其抗拉强度在温度15~80°C范围内增长是较为均匀的。更重要的是:随着温度的降低,其冲击韧度减少缓慢,并不存在脆性转变温度。所以不锈钢在低温时能保持足够的塑性和韧性。

不锈钢的耐热性能

耐热性能是指高温下,既有抗氧化或耐气体介质腐蚀的性能即热稳定性,同时在高温时双有足够的强度即热强性。

不锈钢国际标准标准

标准 标准名


GB 中华人民共和国国家标准(国家技术监督局)

KS 韩国工业标准协会规格Korean Standard

AISI 美国钢铁协会规格America Iron and Steel Institute

SAE 美国汽车技术者协会规格Society of Automative Engineers

ASTM 美国材料试验协会规格American Society for Testing and Material

AWS 美国焊接协会规格American Welding Society

ASME 美国机械技术者协会规格American Society of Mechanical Engineers

BS 英国标准规格British Standard

DIN 德国标准规格Deutsch Industria Normen

CAS 加拿大标准规格Canadian Standard Associatoin

API 美国石油协会规格American Petroleum Association

KR 韩国船舶协会规格Korean Resister of Shipping

NK 日本省事协会规格Hihon Kanji Koki

LR 英国船舶协会规格Llouds Register of Shipping
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条